Application module: Fabrication technology ISO/TS 10303-1670:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Contents

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms
4 Information requirements
    4.1 Required AM ARMs
    4.2 ARM type definitions
          4.2.1 ft_classification_item
          4.2.2 ft_documented_element_select
          4.2.3 ft_external_identification_item
          4.2.4 ft_material_item_select
          4.2.5 ft_property_assignment_select
          4.2.6 ft_requirement_assignment_item
          4.2.7 ft_terminus_condition
          4.2.8 ft_value_select
          4.2.9 layer_position_type
          4.2.10 predefined_design_layer_purpose
          4.2.11 predefined_documentation_layer_purpose
          4.2.12 stiffness_class
          4.2.13 up_or_down
    4.3 ARM entity definitions
          4.3.1 Allocated_passage_minimum_annular_ring
          4.3.2 Copy_stratum_technology_occurrence_relationship
          4.3.3 Default_component_termination_passage_definition
          4.3.4 Default_tapered_blind_via_definition
          4.3.5 Default_unsupported_passage_definition
          4.3.6 Default_via_definition
          4.3.7 Derived_stratum_technology_occurrence_relationship
          4.3.8 Design_layer_technology
          4.3.9 Design_stack_model
          4.3.10 Documentation_layer_technology
          4.3.11 Equivalent_stackup_model_definition
          4.3.12 Equivalent_sub_stack_definition
          4.3.13 Footprint_library_stratum_technology
          4.3.14 Impedance_measurement_setup_requirement
          4.3.15 Impedance_requirement
          4.3.16 Inverse_copy_stratum_technology_occurrence_relationship
          4.3.17 Local_linear_stack
          4.3.18 Passage_deposition_material_identification
          4.3.19 Passage_filling_material_identification
          4.3.20 Passage_technology
          4.3.21 Passage_technology_allocation_to_stack_model
          4.3.22 Stratum_stack_model
          4.3.23 Stratum_sub_stack
          4.3.24 Stratum_surface_technology
          4.3.25 Stratum_technology
          4.3.26 Stratum_technology_mapping_relationship
          4.3.27 Stratum_technology_occurrence
          4.3.28 Stratum_technology_occurrence_feature_constraint
          4.3.29 Stratum_technology_occurrence_link
          4.3.30 Stratum_technology_occurrence_relationship
          4.3.31 Stratum_technology_occurrence_swap_relationship
          4.3.32 Stratum_technology_swap_relationship
    4.4 ARM function definitions
          4.4.1 acyclic_equivalent_stackup_model_definition
          4.4.2 acyclic_stratum_technology_mapping_relationship
          4.4.3 acyclic_stratum_technology_occurrence_relationship
          4.4.4 acyclic_stratum_technology_swap_relationship
          4.4.5 ft_count_unspecified_asto
          4.4.6 ft_get_terminus
          4.4.7 get_stack
          4.4.8 less
          4.4.9 sts_vertex_degree_check
5 Module interpreted model
    5.1 Mapping specification
          5.1.1 Allocated_passage_minimum_annular_ring
          5.1.2 Assigned_property
          5.1.3 Classification_assignment
          5.1.4 Copy_stratum_technology_occurrence_relationship
          5.1.5 Default_component_termination_passage_definition
          5.1.6 Default_tapered_blind_via_definition
          5.1.7 Default_unsupported_passage_definition
          5.1.8 Default_via_definition
          5.1.9 Derived_stratum_technology_occurrence_relationship
          5.1.10 Design_layer_technology
          5.1.11 Design_stack_model
          5.1.12 Document_assignment
          5.1.13 Documentation_layer_technology
          5.1.14 Equivalent_stackup_model_definition
          5.1.15 Equivalent_sub_stack_definition
          5.1.16 External_source_identification
          5.1.17 Footprint_library_stratum_technology
          5.1.18 Impedance_measurement_setup_requirement
          5.1.19 Impedance_requirement
          5.1.20 Inverse_copy_stratum_technology_occurrence_relationship
          5.1.21 Local_linear_stack
          5.1.22 Material_identification
          5.1.23 Passage_deposition_material_identification
          5.1.24 Passage_filling_material_identification
          5.1.25 Passage_technology
          5.1.26 Passage_technology_allocation_to_stack_model
          5.1.27 Requirement_assignment
          5.1.28 Stratum_stack_model
          5.1.29 Stratum_sub_stack
          5.1.30 Stratum_surface_technology
          5.1.31 Stratum_technology
          5.1.32 Stratum_technology_mapping_relationship
          5.1.33 Stratum_technology_occurrence
          5.1.34 Stratum_technology_occurrence_feature_constraint
          5.1.35 Stratum_technology_occurrence_link
          5.1.36 Stratum_technology_occurrence_relationship
          5.1.37 Stratum_technology_occurrence_swap_relationship
          5.1.38 Stratum_technology_swap_relationship
    5.2 MIM EXPRESS short listing
      5.2.1 MIM type definitions
          5.2.1.1 ft_classification_item
          5.2.1.2 ft_document_reference_item
          5.2.1.3 ft_external_identification_item
          5.2.1.4 ft_requirement_assigned_item
      5.2.2 MIM entity definitions
          5.2.2.1 allocated_passage_minimum_annular_ring
          5.2.2.2 copy_stratum_technology_occurrence_relationship
          5.2.2.3 derived_stratum_technology_occurrence_relationship
          5.2.2.4 design_stack_model
          5.2.2.5 equivalent_stackup_model_definition
          5.2.2.6 equivalent_sub_stack_definition
          5.2.2.7 footprint_library_stratum_technology
          5.2.2.8 impedance_measurement_setup_requirement
          5.2.2.9 impedance_requirement
          5.2.2.10 inverse_copy_stratum_technology_occurrence_relationship
          5.2.2.11 local_linear_stack
          5.2.2.12 passage_deposition_material_identification
          5.2.2.13 passage_filling_material_identification
          5.2.2.14 passage_technology
          5.2.2.15 passage_technology_allocation_to_stack_model
          5.2.2.16 stratum_stack_model
          5.2.2.17 stratum_sub_stack
          5.2.2.18 stratum_surface_technology
          5.2.2.19 stratum_technology
          5.2.2.20 stratum_technology_mapping_relationship
          5.2.2.21 stratum_technology_occurrence
          5.2.2.22 stratum_technology_occurrence_feature_constraint
          5.2.2.23 stratum_technology_occurrence_link
          5.2.2.24 stratum_technology_occurrence_relationship
          5.2.2.25 stratum_technology_occurrence_swap_relationship
          5.2.2.26 stratum_technology_swap_relationship
      5.2.3 MIM subtype constraint definitions
          5.2.3.1 ft_property_definition_subtypes
          5.2.3.2 ft_property_definition_relationship_subtypes
Annex A MIM short names
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C ARM EXPRESS-G
Annex D MIM EXPRESS-G
Annex E Computer interpretable listings
Annex F Change history
      F.1 General
      F 2 Changes made in edition 2
            F 2.1 Summary of changes
            F 2.2 Changes made to the ARM
      F 3 Changes made in edition 3
            F 3.1 Summary of changes
            F 3.2 Changes made to the ARM
      F 4 Changes made in edition 4
            F 4.1 Summary of changes
            F 4.2 Changes made to the ARM
            F 4.3 Changes made to the MIM
      F 5 Changes made in edition 5
            F 5.1 Summary of changes
            F 5.2 Changes made to the ARM
            F 5.4 Changes made to the MIM
            F 5.3 Changes made to the mapping
Bibliography
Index

Figures

Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 5
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 5
Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 5
Figure C.5 — ARM entity level EXPRESS-G diagram 4 of 5
Figure C.6 — ARM entity level EXPRESS-G diagram 5 of 5
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 2
Figure D.3 — MIM entity level EXPRESS-G diagram 2 of 2

Tables

Table A.1 — MIM short names of entities
Table E.1 — ARM and MIM EXPRESS listings


© ISO 2018 — All rights reserved