Application module: Fabrication technology ISO/TS 10303-1670:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure D.3 — MIM entity level EXPRESS-G diagram 2 of 2 ../part_template/sys/5_mim.htm#part_template_mim.part_template_definition ../../resources/product_property_definition_schema/product_property_definition_schema.htm#product_property_definition_schema.characterized_object ../requirement_decomposition/sys/5_mim.htm#requirement_decomposition_mim.predefined_requirement_view_definition ../../resources/material_property_definition_schema/material_property_definition_schema.htm#material_property_definition_schema.property_definition_relationship ../../resources/product_definition_schema/product_definition_schema.htm#product_definition_schema.product_definition ../../resources/product_definition_schema/product_definition_schema.htm#product_definition_schema.product_definition_relationship ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.equivalent_stackup_model_definition ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.stratum_sub_stack ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.stratum_technology_mapping_relationship ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.stratum_stack_model ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.passage_technology_allocation_to_stack_model ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.allocated_passage_minimum_annular_ring ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.design_stack_model ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.equivalent_sub_stack_definition ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.impedance_measurement_setup_requirement ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.local_linear_stack ../fabrication_technology/sys/5_mim.htm#fabrication_technology_mim.impedance_requirement


Figure D.3 — MIM entity level EXPRESS-G diagram 2 of 2


© ISO 2018 — All rights reserved