Application module: Fabrication technology ISO/TS 10303-1670:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 5 ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.ft_material_item_select ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.ft_external_identification_item ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.ft_documented_element_select ./armexpg5.htm ./armexpg5.htm ./armexpg3.htm ../document_definition/sys/4_info_reqs.htm#document_definition_arm.document_definition ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../external_item_identification_assignment/sys/4_info_reqs.htm#external_item_identification_assignment_arm.external_source_identification ../external_item_identification_assignment/sys/4_info_reqs.htm#external_item_identification_assignment_arm.external_identification_item ../document_definition/sys/4_info_reqs.htm#document_definition_arm.document_definition ../characterizable_object/sys/4_info_reqs.htm#characterizable_object_arm.characterizable_object ../document_assignment/sys/4_info_reqs.htm#document_assignment_arm.documented_element_select ../generic_material_aspects/sys/4_info_reqs.htm#generic_material_aspects_arm.material_identification ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../generic_material_aspects/sys/4_info_reqs.htm#generic_material_aspects_arm.material_item_select ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../document_definition/sys/4_info_reqs.htm#document_definition_arm.document_definition ../external_item_identification_assignment/sys/4_info_reqs.htm#external_item_identification_assignment_arm.external_source_identification ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.predefined_documentation_layer_purpose ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stiffness_class ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.layer_position_type ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.predefined_design_layer_purpose ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_surface_technology ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_technology_swap_relationship ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_technology_mapping_relationship ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.design_layer_technology ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.documentation_layer_technology ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.stratum_technology ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.footprint_library_stratum_technology


Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 5


© ISO 2018 — All rights reserved