Application module: Mechanical design features and requirements ISO/TS 10303-1846:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Index

Assembly_structure_arm
   ARM interface 4.1
Assembly_structure_mim
   MIM interface 5.2
Associative_draughting_elements_arm
   ARM interface 4.1
Associative_draughting_elements_mim
   MIM interface 5.2
Basic_round_hole
   ARM object definition 4.3.1
   ARM EXPRESS-G C.2
   mapping specification 5.1.1
Basic_round_hole_occurrence
   ARM object definition 4.3.2
   ARM EXPRESS-G C.5
   mapping specification 5.1.2
Basic_round_hole_occurrence_in_assembly
   ARM object definition 4.3.3
   ARM EXPRESS-G C.5
   mapping specification 5.1.3
Characterizable_object_arm
   ARM interface 4.1
Characterizable_object_mim
   MIM interface 5.2
counterbore_countersink_schema
   MIM interface 5.2
Dimension_tolerance_arm
   ARM interface 4.1
Dimension_tolerance_mim
   MIM interface 5.2
Elemental_geometric_shape_arm
   ARM interface 4.1
Elemental_geometric_shape_mim
   MIM interface 5.2
Explicit_composite_hole
   ARM object definition 4.3.5
   ARM EXPRESS-G C.2
   mapping specification 5.1.4
Explicit_round_hole
   ARM object definition 4.3.4
   ARM EXPRESS-G C.2
   mapping specification 5.1.5
Geometric_tolerance_arm
   ARM interface 4.1
Geometric_tolerance_mim
   MIM interface 5.2
get_the_placement
   ARM object definition 4.4.1
Machining_features_arm
   ARM interface 4.1
Machining_features_mim
   MIM interface 5.2
Md_counterbore_hole_definition
   ARM object definition 4.3.6
   ARM EXPRESS-G C.3
   mapping specification 5.1.6
Md_counterbore_hole_occurrence
   ARM object definition 4.3.8
   ARM EXPRESS-G C.5
   mapping specification 5.1.7
Md_counterbore_hole_occurrence_in_assembly
   ARM object definition 4.3.9
   ARM EXPRESS-G C.5
   mapping specification 5.1.8
Md_counterdrill_hole_definition
   ARM object definition 4.3.14
   ARM EXPRESS-G C.4
   mapping specification 5.1.9
Md_counterdrill_hole_occurrence
   ARM object definition 4.3.16
   ARM EXPRESS-G C.5
   mapping specification 5.1.10
Md_counterdrill_hole_occurrence_in_assembly
   ARM object definition 4.3.17
   ARM EXPRESS-G C.5
   mapping specification 5.1.11
Md_countersink_hole_definition
   ARM object definition 4.3.10
   ARM EXPRESS-G C.4
   mapping specification 5.1.12
Md_countersink_hole_occurrence
   ARM object definition 4.3.12
   ARM EXPRESS-G C.5
   mapping specification 5.1.13
Md_countersink_hole_occurrence_in_assembly
   ARM object definition 4.3.13
   ARM EXPRESS-G C.5
   mapping specification 5.1.14
md_requirement_assigned_item
   MIM object definition 5.2.1.1
   MIM EXPRESS-G D.2
md_requirement_assignment_item
   ARM object definition 4.2.1
   ARM EXPRESS-G C.7
md_requirement_source_item
   ARM object definition 4.2.2
   ARM EXPRESS-G C.7
md_requirement_source_item
   MIM object definition 5.2.1.2
   MIM EXPRESS-G D.2
md_tolerance_value_or_limits_and_fits
   ARM object definition 4.2.3
   ARM EXPRESS-G C.2
Mechanical_design_requirement_item_association
   ARM object definition 4.3.23
   ARM EXPRESS-G C.2
   mapping specification 5.1.15
mechanical_design_requirement_item_association
   MIM object definition 5.2.2.1
   MIM EXPRESS-G D.2
mechanical_design_schema
   MIM interface 5.2
Part_view_definition_arm
   ARM interface 4.1
Part_view_definition_mim
   MIM interface 5.2
Requirement_assignment
   mapping specification 5.1.24
Requirement_assignment_arm
   ARM interface 4.1
Requirement_assignment_mim
   MIM interface 5.2
Requirement_source
   mapping specification 5.1.25
Shape_property_assignment_arm
   ARM interface 4.1
Shape_property_assignment_mim
   MIM interface 5.2
Simplified_md_counterbore_hole_definition
   ARM object definition 4.3.7
   ARM EXPRESS-G C.6
   mapping specification 5.1.16
Simplified_md_counterdrill_hole_definition
   ARM object definition 4.3.15
   ARM EXPRESS-G C.6
   mapping specification 5.1.17
Simplified_md_countersink_hole_definition
   ARM object definition 4.3.11
   ARM EXPRESS-G C.6
   mapping specification 5.1.18
Simplified_spotface_hole_definition
   ARM object definition 4.3.20
   ARM EXPRESS-G C.6
   mapping specification 5.1.19
Spotface_definition
   ARM object definition 4.3.18
   ARM EXPRESS-G C.3
   mapping specification 5.1.20
Spotface_hole_definition
   ARM object definition 4.3.19
   ARM EXPRESS-G C.3
   mapping specification 5.1.21
Spotface_occurrence
   ARM object definition 4.3.21
   ARM EXPRESS-G C.5
   mapping specification 5.1.22
Spotface_occurrence_in_assembly
   ARM object definition 4.3.22
   ARM EXPRESS-G C.5
   mapping specification 5.1.23
Value_with_unit_extension_arm
   ARM interface 4.1
Value_with_unit_extension_mim
   MIM interface 5.2


© ISO 2021 — All rights reserved