Application module: Mechanical design features and requirements ISO/TS 10303-1846:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 6 ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.md_tolerance_value_or_limits_and_fits ./armexpg3.htm ./armexpg3.htm ./armexpg4.htm ./armexpg4.htm ./armexpg5.htm ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement_3d ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.length_plus_minus_bounds ../requirement_assignment/sys/4_info_reqs.htm#requirement_assignment_arm.requirement_assignment ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.length_plus_minus_bounds ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.item_identified_representation_usage ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.positive_length_data_element ../machining_features/sys/4_info_reqs.htm#machining_features_arm.hole ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.positive_length_data_element ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.positive_length_data_element ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.length_plus_minus_bounds ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement_3d ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement_3d ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_model ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_model ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.limits_and_fits ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_model ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.positive_length_data_element ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.explicit_round_hole ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.explicit_composite_hole ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.mechanical_design_requirement_item_association ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.basic_round_hole


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 6


© ISO 2021 — All rights reserved