Application module: Mechanical design features and requirements ISO/TS 10303-1846:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.7 — ARM entity level EXPRESS-G diagram 6 of 6 ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.md_requirement_assignment_item ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.md_requirement_source_item ../product_view_definition_relationship/sys/4_info_reqs.htm#product_view_definition_relationship_arm.view_definition_relationship ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../product_identification/sys/4_info_reqs.htm#product_identification_arm.product ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.geometric_dimension ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.product_view_definition ../requirement_assignment/sys/4_info_reqs.htm#requirement_assignment_arm.requirement_source_item ../characterizable_object/sys/4_info_reqs.htm#characterizable_object_arm.characterizable_object ../product_version/sys/4_info_reqs.htm#product_version_arm.product_version ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.geometric_tolerance ../requirement_assignment/sys/4_info_reqs.htm#requirement_assignment_arm.requirement_assignment_item


Figure C.7 — ARM entity level EXPRESS-G diagram 6 of 6


© ISO 2021 — All rights reserved