Application module: Mechanical design features and requirements ISO/TS 10303-1846:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesNext pageLast page
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1 ../associative_draughting_elements/mimexpg1.htm ../../resources/mechanical_design_schema/mechanical_design_schema.htm ../dimension_tolerance/mimexpg1.htm ../../resources/counterbore_countersink_schema/counterbore_countersink_schema.htm ../mechanical_design_features_and_requirements/mimexpg2.htm ../characterizable_object/mimexpg1.htm ../value_with_unit_extension/mimexpg1.htm ../elemental_geometric_shape/mimexpg1.htm ../requirement_assignment/mimexpg1.htm ../assembly_structure/mimexpg1.htm ../machining_features/mimexpg1.htm ../geometric_tolerance/mimexpg1.htm ../part_view_definition/mimexpg1.htm ../shape_property_assignment/mimexpg1.htm


Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1


© ISO 2021 — All rights reserved