ISO/TS 10303-1206:2014-02 Draughting annotation


Application module: Draughting annotation	ISO/TS 10303-1206:2014-02(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARM
4.2 ARM type definitions
4.3 ARM entity definitions
4.4 ARM subtype constraint definition
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.1 Mapping specification

In the following, "Application element" designates any entity data type defined in Clause 4, any of its explicit attributes and any subtype constraint. "MIM element" designates any entity data type defined in Clause 5.2 or imported with a USE FROM statement, from another EXPRESS schema, any of its attributes and any subtype constraint defined in Clause 5.2 or imported with a USE FROM statement.

This clause contains the mapping specification that defines how each application element of this part of ISO 10303 (see Clause 4) maps to one or more MIM elements (see Clause 5.2).

The mapping for each application element is specified in a separate subclause below. The mapping specification of an attribute of an ARM entity is a subclause of the clause that contains the mapping specification of this entity. Each mapping specification subclause contains up to five elements.

Title: The clause title contains:

the name of the considered ARM entity or subtype constraint, or
the name of the considered ARM entity atribute when this attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types, or
a composite expression, <attribute name> to <referred type>, when this attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types.

MIM element: This section contains, depending on the considered application element:

the name of one or more MIM entity data types;
the name of a MIM entity attribute, presented with the syntax <entity name>.<attribute name>, when the considered ARM attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types;
the term PATH, when the considered ARM entity attribute refers to an entity data type or to a SELECT type that contains or may contain entity data types;
the term IDENTICAL MAPPING, when both application objects involved in an application assertion map to the same instance of a MIM entity data type;
the term NO MAPPING EXTENSION PROVIDED, when the extension to an extensible SELECT TYPE has no impact;
the syntax /SUPERTYPE(<supertype name>)/, when the considered ARM entity is mapped as its supertype;
one or more constructs /SUBTYPE(<subtype name>)/, when the mapping of the considered ARM entity is the union of the mapping of its subtypes.

When the mapping of an application element involves more than one MIM element, each of these MIM elements is presented on a separate line in the mapping specification, enclosed between parentheses or brackets.

Source: This section contains:

the ISO standard number and part number in which the MIM element is defined, for those MIM elements that are defined in a common resource document;
the ISO standard number and part number of this part of ISO 10303, for those MIM elements that are defined in the MIM schema of this part.

This section is omitted when the keywords PATH or IDENTICAL MAPPING or NO MAPPING EXTENSION PROVIDED are used in the MIM element section.

Rules: This section contains the name of one or more global rules that apply to the population of the MIM entity data types listed in the MIM element section or in the reference path. When no rule applies, this section is omitted.

A reference to a global rule may be followed by a reference to the subclause in which the rule is defined.

Constraint: This section contains the name of one or more subtype constraints that apply to the population of the MIM entity data types listed in the MIM element section or in the reference path. When no subtype constraint applies, this section is omitted.

A reference to a subtype constraint may be followed by a reference to the subclause in which the subtype constraint is defined.

Reference path: This section contains:

the reference path to its supertypes in the common resources, for each MIM element created within this part of ISO 10303;
the specification of the relationships between MIM elements, when the mapping of an application element requires to relate instances of several MIM entity data types. In such a case, each line in the reference path documents the role of a MIM element relative to the referring MIM element or to the next referred MIM element.

For the expression of reference paths and of the constraints between MIM elements, the following notational conventions apply:

[]	enclosed section constrains multiple MIM elements or sections of the reference path are required to satisfy an information requirement;
()	enclosed section constrains multiple MIM elements or sections of the reference path are identified as alternatives within the mapping to satisfy an information requirement;
{}	enclosed section constrains the reference path to satisfy an information requirement;
<>	enclosed section constrains at one or more required reference path;
\|\|	enclosed section constrains the supertype entity;
->	the attribute, whose name precedes the -> symbol, references the entity or select type whose name follows the -> symbol;
<-	the entity or select type, whose name precedes the <- symbol, is referenced by the entity attribute whose name follows the <- symbol;
[i]	the attribute, whose name precedes the [i] symbol, is an aggregate; any element of that aggregate is referred to;
[n]	the attribute, whose name precedes the [n] symbol, is an ordered aggregate; member n of that aggregate is referred to;
=>	the entity, whose name precedes the => symbol, is a supertype of the entity whose name follows the => symbol;
<=	the entity, whose name precedes the <= symbol, is a subtype of the entity whose name follows the <= symbol;
=	the string, select, or enumeration type is constrained to a choice or value;
\	the reference path expression continues on the next line;
*	one or more instances of the relationship entity data type may be assembled in a relationship tree structure. The path between the relationship entity and the related entities, is enclosed with braces;
--	the text following is a comment or introduces a clause reference;
*>	the select or enumeration type, whose name precedes the > symbol, is extended into the select or enumeration type whose name follows the > symbol;
<*	the select or enumeration type, whose name precedes the <* symbol, is an extension of the select or enumeration type whose name follows the <* symbol;
!{}	section enclosed by {} indicates a negative constraint placed on the mapping.

The definition and use of mapping templates is not supported in the present version of the application modules. However, use of predefined templates /SUBTYPE/ and /SUPERTYPE/ is supported.

5.1.1 Annotation_subfigure

MIM element:	annotation_subfigure_occurrence
Source:	ISO 10303-504

5.1.2 Annotation_symbol

MIM element:	annotation_symbol_occurrence
Source:	ISO 10303-46
Reference path:	annotation_symbol_occurrence <= annotation_occurrence {annotation_occurrence => draughting_annotation_occurrence}

5.1.2.1 Annotation_symbol to symbol_definition_select (as symbol_definition)

#1: If the symbol is not user-defined.

MIM element:	PATH
Reference path:	(annotation_symbol_occurrence <= annotation_occurrence <= styled_item styled_item.item -> representation_item representation_item => geometric_representation_item => defined_symbol defined_symbol.definition -> defined_symbol_select)

#2: If the symbol is user-defined.

MIM element:	PATH
Reference path:	(annotation_symbol_occurrence <= annotation_occurrence <= styled_item styled_item.item -> representation_item representation_item => mapped_item {mapped_item => annotation_symbol} mapped_item.mapping_source -> representation_map {representation_map => symbol_representation_map} representation_map.mapped_representation)

5.1.2.2 Annotation_symbol to Dimension_symbol (as symbol_definition)

MIM element:	PATH
Reference path:	annotation_symbol_occurrence <= annotation_occurrence <= styled_item styled_item.item -> representation_item representation_item => geometric_representation_item => defined_symbol defined_symbol.definition -> defined_symbol_select defined_symbol_select = pre_defined_symbol pre_defined_symbol => pre_defined_dimension_symbol

5.1.2.3 Annotation_symbol to General_symbol (as symbol_definition)

#1: If the symbol is externally defined.

MIM element:	PATH
Reference path:	(annotation_symbol_occurrence <= annotation_occurrence <= styled_item styled_item.item -> representation_item representation_item => geometric_representation_item => defined_symbol defined_symbol.definition -> defined_symbol_select defined_symbol_select = externally_defined_symbol externally_defined_symbol)

#2: If the symbol is user-defined.

MIM element:	PATH
Reference path:	(annotation_symbol_occurrence <= annotation_occurrence <= styled_item styled_item.item -> representation_item representation_item => mapped_item {mapped_item => annotation_symbol} mapped_item.mapping_source -> representation_map {representation_map => symbol_representation_map} representation_map.mapped_representation -> representation => symbol_representation)

5.1.2.4 Annotation_symbol to Geometric_tolerance_symbol (as symbol_definition)

MIM element:	PATH
Reference path:	annotation_symbol_occurrence <= annotation_occurrence <= styled_item styled_item.item -> representation_item representation_item => geometric_representation_item => defined_symbol defined_symbol.definition -> defined_symbol_select defined_symbol_select = pre_defined_symbol pre_defined_symbol => pre_defined_dimension_symbol

5.1.2.5 Annotation_symbol to Marker (as symbol_definition)

MIM element:	PATH
Reference path:	annotation_symbol_occurrence <= annotation_occurrence <= styled_item styled_item.item -> representation_item representation_item => geometric_representation_item => defined_symbol defined_symbol.definition -> defined_symbol_select defined_symbol_select = pre_defined_symbol pre_defined_symbol => pre_defined_point_marker_symbol

5.1.2.6 Annotation_symbol to Surface_condition_symbol (as symbol_definition)

MIM element:	PATH
Reference path:	annotation_symbol_occurrence <= annotation_occurrence <= styled_item styled_item.item -> representation_item representation_item => geometric_representation_item => defined_symbol defined_symbol.definition -> defined_symbol_select defined_symbol_select = pre_defined_symbol pre_defined_symbol => pre_defined_surface_condition_symbol

5.1.2.7 Annotation_symbol to Terminator (as symbol_definition)

MIM element:	PATH
Reference path:	annotation_symbol_occurrence <= annotation_occurrence <= styled_item styled_item.item -> representation_item representation_item => geometric_representation_item => defined_symbol defined_symbol.definition -> defined_symbol_select defined_symbol_select = pre_defined_symbol pre_defined_symbol => pre_defined_terminator_symbol

5.1.3 Dimension_curve_terminator

MIM element:	dimension_curve_terminator
Source:	ISO 10303-101
Reference path:	dimension_curve_terminator <= terminator_symbol

5.1.4 Dimension_symbol

MIM element:	pre_defined_dimension_symbol
Source:	ISO 10303-1206
Reference path:	pre_defined_dimension_symbol <= pre_defined_symbol

5.1.5 Draughting_callout

This application object, Draughting_callout, is defined in the module draughting_element. This mapping section extends the mapping of Draughting_callout, to include assertions defined in this module.

5.1.5.1 Draughting_callout to Annotation_subfigure (as contents)

MIM element:	PATH
Reference path:	draughting_callout draughting_callout.contents[i] -> draughting_callout_element draughting_callout_element = annotation_symbol_occurrence annotation_symbol_occurrence => annotation_subfigure_occurrence

5.1.5.2 Draughting_callout to Annotation_symbol (as contents)

MIM element:	PATH
Reference path:	draughting_callout draughting_callout.contents[i] -> draughting_callout_element draughting_callout_element = annotation_symbol_occurrence annotation_symbol_occurrence

5.1.6 General_symbol

#1: If the symbol is externally defined.

MIM element:	(externally_defined_symbol)
Source:	ISO 10303-46

#2: If the symbol is user-defined.

MIM element:	draughting_symbol_representation
Source:	46
Reference path:	(draughting_symbol_representation <= symbol_representation)

5.1.7 Geometric_tolerance_symbol

MIM element:	pre_defined_geometrical_tolerance_symbol
Source:	ISO 10303-1206
Reference path:	pre_defined_geometrical_tolerance_symbol <= pre_defined_symbol

5.1.8 Surface_condition_symbol

MIM element:	pre_defined_surface_condition_symbol
Source:	ISO 10303-1206
Reference path:	pre_defined_surface_condition_symbol <= pre_defined_symbol

5.1.9 Terminator_symbol

MIM element:	terminator_symbol
Source:	ISO 10303-101

5.1.10 alternate_annotation_elements

maps to subtype constraint annotation_occurrence_subtypes.

Constraint:	annotation_occurrence_subtypes
Source:	ISO 10303-101