Application module: Schematic element ISO/TS 10303-1205:2005(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

Annex A
(normative)

MIM short names

Table A.1 provides the short names for entities defined in the MIM of this part of ISO 10303.

Entity names in this part of ISO 10303 have been defined in Clause 5.2 and in other ISO standards identified in Clause 2.

Requirements on the use of the short names are found in the implementation methods included in ISO 10303.

NOTE  The EXPRESS entity names are available from Internet:

< http://www.tc184-sc4.org/Short_Names/ >

Table A.1— MIM short names of entities

Entity data types names Short names
composition_of_schematic_element_occurrence COSEO
connection_of_schematic_element_occurrence COS0
definition_of_schematic_element_occurrence DOSEO
derivation_of_schematic_element_definition DOSED
draughting_model DRGMDL
explicit_schematic_element_definition ESED
implicit_schematic_element_definition ISED
schematic_element SCHELM
schematic_element_definition SCELDF
schematic_element_occurrence SCELOC
usage_of_schematic_element_occurrence UOSEO


© ISO 2005 — All rights reserved