Application module: Physical unit shape with parameters ISO/TS 10303-1730:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

EXPRESS specification:

*)
SCHEMA Physical_unit_shape_with_parameters_mim;

USE FROM Shape_parameters_mim;    --  ISO/TS 10303-1743

USE FROM Physical_unit_usage_view_mim;    --  ISO/TS 10303-1732
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Shape_parameters_mim ISO/TS 10303-1743
Physical_unit_usage_view_mim ISO/TS 10303-1732

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM type definitions

This subclause specifies the MIM types for this application module. The MIM types and definitions are specified below.

5.2.1.1 puswp_external_identification_item   EXPRESS-G

The puswp_external_identification_item type is an extension of the external_identification_item type. It adds the data type shape_representation to the list of alternate data types.

NOTE  The list of entity data types may be extended in application modules that use the constructs of this module.

EXPRESS specification:

*)
TYPE puswp_external_identification_item = EXTENSIBLE GENERIC_ENTITY SELECT BASED_ON external_identification_item WITH
   (shape_representation);
END_TYPE;
(*

5.2.1.2 puswp_requirement_assigned_item   EXPRESS-G

The puswp_requirement_assigned_item type is an extension of the requirement_assigned_item type. It adds the data type shape_representation to the list of alternate data types.

NOTE  The list of entity data types may be extended in application modules that use the constructs of this module.

EXPRESS specification:

*)
TYPE puswp_requirement_assigned_item = EXTENSIBLE GENERIC_ENTITY SELECT BASED_ON requirement_assigned_item WITH
   (shape_representation);
END_TYPE;
(*



*)
END_SCHEMA;  -- Physical_unit_shape_with_parameters_mim
(*


© ISO 2014 — All rights reserved