Application module: Shape parameters ISO/TS 10303-1743:2010-08(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

EXPRESS specification:

*)
SCHEMA Shape_parameters_mim;

USE FROM External_item_identification_assignment_mim;    --  ISO/TS 10303-1128

USE FROM product_property_definition_schema    --  ISO 10303-41
  (characterized_object);
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

External_item_identification_assignment_mim ISO/TS 10303-1128
product_property_definition_schema ISO 10303-41

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definition

This subclause specifies the MIM entity for this module. The MIM entity and definition is specified below.

5.2.1.1 keepout_design_object_category   EXPRESS-G

A keepout_design_object_category is a type of characterized_object that specifies a design object category for the implementation of the ARM concepts of:

EXPRESS specification:

*)
ENTITY keepout_design_object_category
  SUBTYPE OF (characterized_object);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Shape_parameters_mim
(*


© ISO 2010 — All rights reserved