Application module: Physical unit shape with parameters ISO/TS 10303-1730:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1 ../physical_unit_shape_with_parameters/sys/5_mim.htm#physical_unit_shape_with_parameters_mim.puswp_requirement_assigned_item ../physical_unit_shape_with_parameters/sys/5_mim.htm#physical_unit_shape_with_parameters_mim.puswp_external_identification_item ../external_item_identification_assignment/sys/5_mim.htm#external_item_identification_assignment_mim.external_identification_item ../../resources/product_property_representation_schema/product_property_representation_schema.htm#product_property_representation_schema.shape_representation ../../resources/product_property_representation_schema/product_property_representation_schema.htm#product_property_representation_schema.shape_representation ../requirement_assignment/sys/5_mim.htm#requirement_assignment_mim.requirement_assigned_item


Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1


© ISO 2014 — All rights reserved