Application module: Part template 3D shape ISO/TS 10303-1717:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Index

Edge_segment_cross_section
   ARM object definition 4.3.1
   ARM EXPRESS-G C.2
   mapping specification 5.1.1
edge_segment_cross_section
   MIM object definition 5.2.1.1
   MIM EXPRESS-G D.2
Edge_shape_feature_arm
   ARM interface 4.1
Edge_shape_feature_mim
   MIM interface 5.2
Inter_stratum_feature_edge_segment_template_with_cross_section
   ARM object definition 4.3.2
   ARM EXPRESS-G C.2
   mapping specification 5.1.2
inter_stratum_feature_edge_segment_template_with_cross_section
   MIM object definition 5.2.1.2
   MIM EXPRESS-G D.2
Layered_3d_shape_arm
   ARM interface 4.1
Layered_3d_shape_mim
   MIM interface 5.2
Layered_interconnect_simple_template_arm
   ARM interface 4.1
Layered_interconnect_simple_template_mim
   MIM interface 5.2
Part_template_3d_keepout_shape_model
   ARM object definition 4.3.3
   ARM EXPRESS-G C.2
   mapping specification 5.1.3
Part_template_3d_shape_model
   ARM object definition 4.3.4
   ARM EXPRESS-G C.2
   mapping specification 5.1.4
pt3ds_part_template_or_physical_unit_3d_shape_model_select
   ARM object definition 4.2.1
   ARM EXPRESS-G C.2
pt3ds_requirement_assignment_item
   ARM object definition 4.2.2
   ARM EXPRESS-G C.2
Requirement_assignment
   mapping specification 5.1.5
Requirement_decomposition_arm
   ARM interface 4.1


© ISO 2018 — All rights reserved