Application module: Part template 3D shape ISO/TS 10303-1717:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Part_template_3d_shape_mim;

USE FROM Edge_shape_feature_mim;    --  ISO/TS 10303-1673

USE FROM Layered_3d_shape_mim;    --  ISO/TS 10303-1694

USE FROM Layered_interconnect_simple_template_mim;    --  ISO/TS 10303-1718
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Edge_shape_feature_mim ISO/TS 10303-1673
Layered_3d_shape_mim ISO/TS 10303-1694
Layered_interconnect_simple_template_mim ISO/TS 10303-1718

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definitions

This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.

5.2.1.1 edge_segment_cross_section   EXPRESS-G

A edge_segment_cross_section is a type of shape_definition_3d_intersection that implements the ARM concept of Edge_segment_cross_section.

EXPRESS specification:

*)
ENTITY edge_segment_cross_section
  SUBTYPE OF (shape_definition_3d_intersection);
END_ENTITY;
(*

5.2.1.2 inter_stratum_feature_edge_segment_template_with_cross_section   EXPRESS-G

A inter_stratum_feature_edge_segment_template_with_cross_section is a type of inter_stratum_feature_edge_segment_template that implements the ARM concept of Inter_stratum_feature_edge_segment_template_with_cross_section.

EXPRESS specification:

*)
ENTITY inter_stratum_feature_edge_segment_template_with_cross_section
  SUBTYPE OF (inter_stratum_feature_edge_segment_template);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Part_template_3d_shape_mim
(*


© ISO 2018 — All rights reserved