Application module: Part template 3D shape ISO/TS 10303-1717:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1 ../layered_3d_shape/sys/5_mim.htm#layered_3d_shape_mim.shape_definition_3d_intersection ../layered_interconnect_simple_template/sys/5_mim.htm#layered_interconnect_simple_template_mim.inter_stratum_feature_edge_segment_template ../part_template_3d_shape/sys/5_mim.htm#part_template_3d_shape_mim.inter_stratum_feature_edge_segment_template_with_cross_section ../part_template_3d_shape/sys/5_mim.htm#part_template_3d_shape_mim.edge_segment_cross_section


Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved