Application module: Assembly module design ISO/TS 10303-1636:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

(*
ISO/TC 184/SC 4/WG 12 N9477 - ISO/TS 10303-1636 Assembly module design - EXPRESS MIM
Supersedes ISO/TC 184/SC 4/WG 12 N8087
*)



SCHEMA Assembly_module_design_mim;

USE FROM Assembly_module_usage_view_mim;    -- ISO/TS 10303-1642

USE FROM Assembly_technology_mim;    -- ISO/TS 10303-1649

USE FROM Physical_component_feature_mim;    -- ISO/TS 10303-1721

USE FROM Physical_unit_design_view_mim;    -- ISO/TS 10303-1728

USE FROM Physical_connectivity_layout_topology_requirement_mim;    -- ISO/TS 10303-1826

USE FROM Physical_connectivity_definition_mim;    -- ISO/TS 10303-1755


ENTITY assembly_module_design_view
  SUBTYPE OF (physical_unit);
END_ENTITY;

ENTITY component_mounting_feature
  SUBTYPE OF (physical_component_feature);
END_ENTITY;

END_SCHEMA;  -- Assembly_module_design_mim


© ISO 2018 — All rights reserved