Application module: Assembly module design ISO/TS 10303-1636:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 10303-1,  Industrial automation systems and integration — Product data representation and exchange — Part 1: Overview and fundamental principles

ISO 10303-11,  Industrial automation systems and integration — Product data representation and exchange — Part 11: Description methods: The EXPRESS language reference manual

ISO/TS 10303-1642,  Industrial automation systems and integration — Product data representation and exchange — Part 1642: Application module: Assembly module usage view

ISO/TS 10303-1649,  Industrial automation systems and integration — Product data representation and exchange — Part 1649: Application module: Assembly technology

ISO/TS 10303-1721,  Industrial automation systems and integration — Product data representation and exchange — Part 1721: Application module: Physical component feature

ISO/TS 10303-1728,  Industrial automation systems and integration — Product data representation and exchange — Part 1728: Application module: Physical unit design view

ISO/TS 10303-1755,  Industrial automation systems and integration — Product data representation and exchange — Part 1755: Application module: Physical connectivity definition

ISO/TS 10303-1826,  Industrial automation systems and integration — Product data representation and exchange — Part 1826: Application module: Physical connectivity layout topology requirement

IEC 60050-541,  International Electrotechnical Vocabulary— Chapter 541: Printed circuits



© ISO 2018 — All rights reserved