Application module: Assembly module design ISO/TS 10303-1636:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../assembly_module_design/sys/4_info_reqs.htm#assembly_module_design_arm.assembly_module_or_assembly_group_component ../physical_unit_design_view/sys/4_info_reqs.htm#physical_unit_design_view_arm.part_design_view ../part_external_reference/sys/4_info_reqs.htm#part_external_reference_arm.part_terminal_external_reference ../component_feature/sys/4_info_reqs.htm#component_feature_arm.component_feature_relationship ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../item_definition_structure/sys/4_info_reqs.htm#item_definition_structure_arm.assembly_definition ../part_feature_function/sys/4_info_reqs.htm#part_feature_function_arm.part_mounting_feature ../physical_component_feature/sys/4_info_reqs.htm#physical_component_feature_arm.physical_component_terminal ../physical_component_feature/sys/4_info_reqs.htm#physical_component_feature_arm.physical_component_feature ../assembly_module_design/sys/4_info_reqs.htm#assembly_module_design_arm.component_feature_external_reference ../assembly_module_design/sys/4_info_reqs.htm#assembly_module_design_arm.minimally_defined_component_terminal ../assembly_module_design/sys/4_info_reqs.htm#assembly_module_design_arm.component_mounting_feature ../assembly_module_design/sys/4_info_reqs.htm#assembly_module_design_arm.assembly_module_design_view ../assembly_module_design/sys/4_info_reqs.htm#assembly_module_design_arm.component_external_reference ../assembly_module_design/sys/4_info_reqs.htm#assembly_module_design_arm.component_mounting_clearance_relationship


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved