Integrated application resource: Mechanical features ISO 10303-113:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Counterbore countersink
   4.1 General
   4.2 Fundamental concepts and assumptions
   4.3 Counterbore countersink type definitions
   4.4 Counterbore countersink entity definitions
   4.5 Counterbore countersink subtype constraint definition
5 Machining feature
   5.1 General
   5.2 Fundamental concepts and assumptions
   5.3 Machining feature type definition
   5.4 Machining feature entity definitions
   5.5 Machining feature subtype constraint definition
   5.6 Machining feature rule definitions
6 Mechanical design
   6.1 General
   6.2 Fundamental concepts and assumptions
   6.3 Mechanical design type definitions
   6.4 Mechanical design entity definitions
   6.5 Mechanical design function definitions
   6.6 Mechanical design rule definitions

A Short names of entities
B Information object registration
C Computer interpretable listings
D EXPRESS-G diagrams
E Technical discussion
F Change history
Bibliography
Index

Contents

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms
4 Counterbore countersink schema
     4.1 General
     4.2 Fundamental concepts and assumptions
     4.3 Counterbore countersink type definitions
          4.3.1 ccs_item_identified_representation_usage_definition
          4.3.2 tolerance_value_or_limits_and_fits
     4.4 Counterbore countersink entity definitions
          4.4.1 basic_round_hole
          4.4.2 basic_round_hole_occurrence
          4.4.3 basic_round_hole_occurrence_in_assembly
          4.4.4 counterbore_hole_definition
          4.4.5 counterbore_hole_occurrence
          4.4.6 counterbore_hole_occurrence_in_assembly
          4.4.7 counterdrill_hole_definition
          4.4.8 counterdrill_hole_occurrence
          4.4.9 counterdrill_hole_occurrence_in_assembly
          4.4.10 countersink_hole_definition
          4.4.11 countersink_hole_occurrence
          4.4.12 countersink_hole_occurrence_in_assembly
          4.4.13 explicit_composite_hole
          4.4.14 explicit_round_hole
          4.4.15 simplified_counterbore_hole_definition
          4.4.16 simplified_counterdrill_hole_definition
          4.4.17 simplified_countersink_hole_definition
          4.4.18 simplified_spotface_hole_definition
          4.4.19 spotface_definition
          4.4.20 spotface_hole_definition
          4.4.21 spotface_occurrence
          4.4.22 spotface_occurrence_in_assembly
     4.5 Counterbore countersink subtype constraint definition
          4.5.1 round_hole_subtypes
5 Machining feature schema
     5.1 General
     5.2 Fundamental concepts and assumptions
     5.3 Machining feature type definition
          5.3.1 machining_feature_definition
     5.4 Machining feature entity definitions
          5.4.1 applied_area
          5.4.2 boss
          5.4.3 boss_top
          5.4.4 chamfer
          5.4.5 chamfer_offset
          5.4.6 circular_closed_profile
          5.4.7 circular_pattern
          5.4.8 closed_path_profile
          5.4.9 composite_hole
          5.4.10 compound_feature
          5.4.11 direction_shape_representation
          5.4.12 edge_round
          5.4.13 externally_defined_feature_definition
          5.4.14 face_shape_representation
          5.4.15 feature_component_definition
          5.4.16 feature_component_relationship
          5.4.17 feature_pattern
          5.4.18 fillet
          5.4.19 flat_face
          5.4.20 gear
          5.4.21 hole_bottom
          5.4.22 linear_profile
          5.4.23 location_shape_representation
          5.4.24 marking
          5.4.25 modified_pattern
          5.4.26 ngon_closed_profile
          5.4.27 open_path_profile
          5.4.28 outer_round
          5.4.29 outside_profile
          5.4.30 partial_circular_profile
          5.4.31 path_feature_component
          5.4.32 path_shape_representation
          5.4.33 pattern_offset_membership
          5.4.34 pattern_omit_membership
          5.4.35 planar_shape_representation
          5.4.36 pocket
          5.4.37 pocket_bottom
          5.4.38 profile_floor
          5.4.39 protrusion
          5.4.40 rectangular_closed_profile
          5.4.41 rectangular_pattern
          5.4.42 removal_volume
          5.4.43 replicate_feature
          5.4.44 revolved_profile
          5.4.45 rib_top
          5.4.46 rib_top_floor
          5.4.47 round_hole
          5.4.48 rounded_end
          5.4.49 rounded_u_profile
          5.4.50 shape_defining_relationship
          5.4.51 slot
          5.4.52 slot_end
          5.4.53 spherical_cap
          5.4.54 square_u_profile
          5.4.55 step
          5.4.56 taper
          5.4.57 tee_profile
          5.4.58 thread
          5.4.59 thread_runout
          5.4.60 transition_feature
          5.4.61 turned_knurl
          5.4.62 vee_profile
     5.5 Machining feature subtype constraint definition
          5.5.1 machining_feature_definition_subtypes
     5.6 Machining feature rule definition
          5.6.1 machining_feature_definition_constraints
6 Mechanical design schema
     6.1 General
     6.2 Fundamental concepts and assumptions
     6.3 Mechanical design type definitions
          6.3.1 annotation_placeholder_occurrence_role
          6.3.2 md_draughting_callout_element
          6.3.3 md_geometric_set_select
     6.4 Mechanical design entity definitions
          6.4.1 annotation_placeholder_occurrence
          6.4.2 draughting_model_item_association_with_placeholder
          6.4.3 pmi_requirement_item_association
     6.5 Mechanical design function definitions
          6.5.1 get_tri_for_pd
          6.5.2 md_pmi_name_and_type_correlation
          6.5.3 md_valid_content_in_geometric_set_for_placeholder
     6.6 Mechanical design rule definition
          6.6.1 tri_identification_within_product_definition
Annex A Short names of entities
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C Computer interpretable listings
Annex D EXPRESS-G diagrams
Annex E Technical discussion
Annex F Change history
      F.1 General
      F 2 Changes made in edition 2
            F 2.1 Summary of changes
            F 2.3 Changes made to schema counterbore_countersink_schema
            F 2.5 Changes made to schema mechanical_design_schema
Bibliography
Index

Figures

Figure 1 — The relationship of the schemas of this document to the ISO 10303 integration architecture
Figure 2 — counterbore_hole_definition attributes
Figure 3 — counterdrill_hole_definition attributes
Figure 4 — countersink_hole_definition attributes
Figure 5 — spotface_definition attributes
Figure 6 — Pattern offset required instances
Figure 7 — Pattern omit required instances
Figure D.1 — EXPRESS-G diagram of the counterbore_countersink_schema (1 of 5)
Figure D.2 — EXPRESS-G diagram of the counterbore_countersink_schema (2 of 5)
Figure D.3 — EXPRESS-G diagram of the counterbore_countersink_schema (3 of 5)
Figure D.4 — EXPRESS-G diagram of the counterbore_countersink_schema (4 of 5)
Figure D.5 — EXPRESS-G diagram of the counterbore_countersink_schema (5 of 5)
Figure D.6 — EXPRESS-G diagram of the machining_feature_schema (1 of 4)
Figure D.7 — EXPRESS-G diagram of the machining_feature_schema (2 of 4)
Figure D.8 — EXPRESS-G diagram of the machining_feature_schema (3 of 4)
Figure D.9 — EXPRESS-G diagram of the machining_feature_schema (4 of 4)
Figure D.10 — EXPRESS-G diagram of the mechanical_design_schema (1 of 2)
Figure D.11 — EXPRESS-G diagram of the mechanical_design_schema (2 of 2)

Tables

Table 1 — Illustration of use case applications of entities in this schema
Table C.1 — EXPRESS listings


© ISO 2021 — All rights reserved