B.1 Document Identification

To provide for unambiguous identification of an information object in an open system, the object identifier

{ iso standard 10303 part(113) version(2) }

is assigned to this document. The meaning of this value is defined in ISO/IEC 8824-1, and is described in ISO 10303-1.

B.2 Schema identification

B.2.1 counterbore-countersink-schema schema identification

To provide for unambiguous identification of the schema specifications given in this integrated resource in an open information system, the object identifiers are assigned as follows:

{ iso standard 10303 part(113) version(2) object(1) counterbore-countersink-schema(1) }

is assigned to the counterbore-countersink-schema schema. The meaning of this value is defined in ISO/IEC 8824-1, and is described in ISO 10303-1.

B.2.2 machining-feature-schema schema identification

To provide for unambiguous identification of the schema specifications given in this integrated resource in an open information system, the object identifiers are assigned as follows:

{ iso standard 10303 part(113) version(1) object(1) machining-feature-schema(2) }

is assigned to the machining-feature-schema schema. The meaning of this value is defined in ISO/IEC 8824-1, and is described in ISO 10303-1.

B.2.3 mechanical-design-schema schema identification

To provide for unambiguous identification of the schema specifications given in this integrated resource in an open information system, the object identifiers are assigned as follows:

{ iso standard 10303 part(113) version(2) object(1) mechanical-design-schema(3) }

is assigned to the mechanical-design-schema schema. The meaning of this value is defined in ISO/IEC 8824-1, and is described in ISO 10303-1.

© ISO 2021 — All rights reserved