Integrated application resource: Draughting ISO 10303-101:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Drawing definition
   4.1 General
   4.2 Fundamental concepts and assumptions
   4.3 Drawing definition type definition
   4.4 Drawing definition entity definitions
   4.5 Drawing definition rule definitions
5 Draughting element
   5.1 General
   5.2 Fundamental concepts and assumptions
   5.3 Draughting element type definitions
   5.4 Draughting element entity definitions
   5.5 Draughting element subtype constraint definition
6 Draughting dimension
   6.1 General
   6.2 Fundamental concepts and assumptions
   6.3 Draughting dimension entity definitions

A Short names of entities
B Information object registration
C Computer interpretable listings
D EXPRESS-G diagrams
E Change history
Bibliography
Index

3 Terms, definitions and abbreviated terms

3.1 Terms and definitions

3.1.1 Terms defined in ISO 129-1

For the purposes of this document, the following terms defined in ISO 129-1 apply:

3.1.2 Terms defined in ISO 10303-1

For the purposes of this document, the following terms defined in ISO 10303-1 apply:

3.1.3 Terms defined in ISO 10303-42

For the purposes of this document, the following terms defined in ISO 10303-42 apply:

3.1.4 Terms defined in ISO 10303-46

For the purposes of this document, the following terms defined in ISO 10303-46 apply:

3.1.5 Terms defined in ISO 16792

For the purposes of this document, the following terms defined in ISO 16792 apply:

3.1.6 Other terms and definitions

For the purposes of this document, the following terms and definitions apply:

3.1.6.1
callout

depiction of requirements and information about a product

3.1.6.2
draughting

activity of selecting and configuring appropriate representations of product data for the human-interpretable presentation in the form of a drawing

3.1.6.3
drawing sheet

subdivision of a drawing having the same identifier as the drawing and its own sheet number

NOTE    A drawing sheet can contain part or all of the text or pictorial presentations of the drawing.

3.2 Abbreviated terms

For the purposes of this document, the following abbreviated terms apply:

URL uniform resource locator
apll annotation placeholder leader line
des draughting element schema
CAD computer aided design
PMI product manufacturing information


© ISO 2021 — All rights reserved