Application module: Single part representation | ISO/TS 10303-1133:2011-10(E) © ISO |
This clause specifies the information requirements for the Single part representation application module. The information requirements are specified as the Application Reference Model (ARM) of this application module.
NOTE 1 A graphical representation of the information requirements is given in Annex C.
NOTE 2 The mapping specification is specified in 5.1. It shows how the information requirements are met by using common resources and constructs defined or imported in the MIM schema of this application module.
This clause defines the information requirements to which implementations shall conform using the EXPRESS language as defined in ISO 10303-11. The following begins the Single_part_representation_arm schema and identifies the necessary external references.
EXPRESS specification:
*)
SCHEMA Single_part_representation_arm;
(*
The following EXPRESS interface statements specify the elements imported from the ARMs of other application modules.
EXPRESS specification:
*)
USE FROM
Document_assignment_arm;
--
ISO/TS 10303-1122
USE FROM
Extended_measure_representation_arm;
--
ISO/TS 10303-1106
USE FROM
Part_view_definition_arm;
--
ISO/TS 10303-1023
USE FROM
Person_organization_assignment_arm;
--
ISO/TS 10303-1013
USE FROM
Property_assignment_arm;
--
ISO/TS 10303-1030
USE FROM
Shape_property_assignment_arm;
--
ISO/TS 10303-1032
(*
NOTE 1 The schemas referenced above are specified in the following part of ISO 10303:
Document_assignment_arm ISO/TS 10303-1122 Extended_measure_representation_arm ISO/TS 10303-1106 Part_view_definition_arm ISO/TS 10303-1023 Person_organization_assignment_arm ISO/TS 10303-1013 Property_assignment_arm ISO/TS 10303-1030 Shape_property_assignment_arm ISO/TS 10303-1032
NOTE 2 See Annex C, Figures C.1and C.2 for a graphical representation of this schema.
This subclause specifies the ARM types for this application module. The ARM types and definitions are specified below.
The spr_documented_element_select type is an extension of the documented_element_select type. It adds the data types Part, Part_version and Part_view_definition to the list of alternate data types.
EXPRESS specification:
*)
TYPE
spr_documented_element_select =
SELECT
BASED_ON
documented_element_select
WITH
(Part,
Part_version,
Part_view_definition);
END_TYPE;
(*
The spr_organization_or_person_in_organization_item type is an extension of the organization_or_person_in_organization_item type. It adds the data types Document, Document_definition, Document_version, Part, Part_version and Part_view_definition to the list of alternate data types.
NOTE The list of entity data types may be extended in application modules that use the constructs of this module.
EXPRESS specification:
*)
TYPE
spr_organization_or_person_in_organization_item =
EXTENSIBLE
GENERIC_ENTITY
SELECT
BASED_ON
organization_or_person_in_organization_item
WITH
(Document,
Document_definition,
Document_version,
Part,
Part_version,
Part_view_definition);
END_TYPE;
(*
The spr_product_property_assignment type is an extension of the property_assignment_select type. It adds the data type Part_view_definition to the list of alternate data types.
EXPRESS specification:
*)
TYPE
spr_product_property_assignment =
SELECT
BASED_ON
property_assignment_select
WITH
(Part_view_definition);
END_TYPE;
(*
*)
END_SCHEMA; -- Single_part_representation_arm
(*
© ISO 2011 — All rights reserved