Application module: Document and version identification ISO/TS 10303-1121:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
   4.3 ARM rule definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

4 Information requirements

This clause specifies the information requirements for the Document and version identification application module. The information requirements are specified as the Application Reference Model (ARM) of this application module.

NOTE 1  A graphical representation of the information requirements is given in Annex C.

NOTE 2  The mapping specification is specified in 5.1. It shows how the information requirements are met by using common resources and constructs defined or imported in the MIM schema of this application module.

This clause defines the information requirements to which implementations shall conform using the EXPRESS language as defined in ISO 10303-11. The following begins the Document_and_version_identification_arm schema and identifies the necessary external references.

EXPRESS specification:

*)
SCHEMA Document_and_version_identification_arm;
(*

4.1 Required AM ARMs

The following EXPRESS interface statements specify the elements imported from the ARMs of other application modules.

EXPRESS specification:

*)
USE FROM Product_identification_arm;    --  ISO/TS 10303-1017

USE FROM Product_version_arm;    --  ISO/TS 10303-1018
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Product_identification_arm ISO/TS 10303-1017
Product_version_arm ISO/TS 10303-1018

NOTE 2   See Annex C, Figures C.1and C.2 for a graphical representation of this schema.

4.2 ARM entity definitions

This subclause specifies the ARM entities for this module. Each ARM application entity is an atomic element that embodies a unique application concept and contains attributes specifying the data elements of the entity. The ARM entities and definitions are specified below.

4.2.1 Document   EXPRESS-GMapping table

A Document is a type of Product used to identify documentation data that is under configuration change management.

EXPRESS specification:

*)
ENTITY Document
  SUBTYPE OF (Product);
END_ENTITY;
(*

4.2.2 Document_version   EXPRESS-GMapping table

A Document_version is a type of Product_version. A Document_version identifies a particular version of a document.

EXPRESS specification:

*)
ENTITY Document_version
  SUBTYPE OF (Product_version);
  SELF\Product_version.of_product : Document;
END_ENTITY;
(*

Attribute definitions:

of_product: the Document of which the instance of this entity type is a version.

4.3 ARM rule definition

This subclause specifies the ARM rule for this module. The ARM rule and definition is specified below.

4.3.1 document_version_constraint

Every Product_version referencing a Document is a Document_version.

EXPRESS specification:

*)
RULE document_version_constraint FOR
(Product_version);
WHERE
  WR1: SIZEOF ( QUERY ( pv <* Product_version | ( NOT ( 'DOCUMENT_AND_VERSION_IDENTIFICATION_ARM.' + 'DOCUMENT_VERSION' IN TYPEOF ( pv) ) ) AND ( 'DOCUMENT_AND_VERSION_IDENTIFICATION_ARM.' + 'DOCUMENT' IN TYPEOF ( pv.of_product) ) ) ) = 0 ;
END_RULE;
(*

Argument definitions:

Product_version : the set of all instances of Product_version.

Formal propositions:

WR1: Every Product_version referencing a Document is a Document_version.



*)
END_SCHEMA;  -- Document_and_version_identification_arm
(*


© ISO 2014 — All rights reserved