Application module: Sequential laminate assembly design ISO/TS 10303-1741:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 2 ../sequential_laminate_assembly_design/sys/4_info_reqs.htm#sequential_laminate_assembly_design_arm.slad_material_item_select ../sequential_laminate_assembly_design/sys/4_info_reqs.htm#sequential_laminate_assembly_design_arm.slad_groupable_item ../product_occurrence/sys/4_info_reqs.htm#product_occurrence_arm.definition_based_product_occurrence ../group/sys/4_info_reqs.htm#group_arm.group_relationship ../generic_material_aspects/sys/4_info_reqs.htm#generic_material_aspects_arm.material_item_select ../assembly_module_with_interconnect_component/sys/4_info_reqs.htm#assembly_module_with_interconnect_component_arm.interconnect_module_component_terminal ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.interconnect_module_stratum_assembly_relationship ../group/sys/4_info_reqs.htm#group_arm.groupable_item ../interconnect_module_usage_view/sys/4_info_reqs.htm#interconnect_module_usage_view_arm.interconnect_module_terminal ../sequential_laminate_assembly_design/sys/4_info_reqs.htm#sequential_laminate_assembly_design_arm.interconnect_module_product_assembly_view_fabrication_joint ../sequential_laminate_assembly_design/sys/4_info_reqs.htm#sequential_laminate_assembly_design_arm.interconnect_module_stratum_based_terminal ../sequential_laminate_assembly_design/sys/4_info_reqs.htm#sequential_laminate_assembly_design_arm.interconnect_module_component_stratum_based_terminal


Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 2


© ISO 2018 — All rights reserved