ISO/TS 10303-1737:2021 Printed physical layout template


Application module: Printed physical layout template	ISO/TS 10303-1737:2021(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
4.3 ARM entity definitions
4.4 ARM subtype constraint definition
4.5 ARM function definitions
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM type definition
5.2.2 MIM entity definitions
5.2.3 MIM subtype constraint definition

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
          4.2.1 pplt_usage_concept
          4.2.2 printed_part_template_terminal_class
4.3 ARM entity definitions
          4.3.1 Basic_multi_stratum_printed_part_template
          4.3.2 Functional_usage_view_to_printed_part_template_terminal_assignment
          4.3.3 Multi_stratum_printed_part_template
          4.3.4 Non_conductive_cross_section_template
          4.3.5 Printed_connector_template
          4.3.6 Printed_connector_template_terminal_relationship
          4.3.7 Printed_part_cross_section_template
          4.3.8 Printed_part_cross_section_template_terminal
          4.3.9 Printed_part_template
          4.3.10 Printed_part_template_connected_terminals_definition
          4.3.11 Printed_part_template_interface_terminal
          4.3.12 Printed_part_template_join_terminal
          4.3.13 Printed_part_template_material
          4.3.14 Printed_part_template_material_link
          4.3.15 Printed_part_template_terminal
          4.3.16 Printed_tiebar_template
          4.3.17 Single_stratum_printed_part_template
          4.3.18 Structured_printed_part_template
          4.3.19 Structured_printed_part_template_terminal
          4.3.20 Template_material_cross_section_boundary
4.4 ARM subtype constraint definition
          4.4.1 pplt_template_definition_subtypes
4.5 ARM function definitions
          4.5.1 acyclic_printed_part_template_material_link
          4.5.2 ap2d_geometrically_in_tiebar
          4.5.3 pplt_get_gm
          4.5.4 pplt_get_pcl_ap2d
          4.5.5 pplt_get_tl_ap2d
5 Module interpreted model
5.1 Mapping specification
          5.1.1 Basic_multi_stratum_printed_part_template
          5.1.2 Functional_usage_view_to_printed_part_template_terminal_assignment
          5.1.3 Multi_stratum_printed_part_template
          5.1.4 Non_conductive_cross_section_template
          5.1.5 Printed_connector_template
          5.1.6 Printed_connector_template_terminal_relationship
          5.1.7 Printed_part_cross_section_template
          5.1.8 Printed_part_cross_section_template_terminal
          5.1.9 Printed_part_template
          5.1.10 Printed_part_template_connected_terminals_definition
          5.1.11 Printed_part_template_interface_terminal
          5.1.12 Printed_part_template_join_terminal
          5.1.13 Printed_part_template_material
          5.1.14 Printed_part_template_material_link
          5.1.15 Printed_part_template_terminal
          5.1.16 Printed_tiebar_template
          5.1.17 Single_stratum_printed_part_template
          5.1.18 Structured_printed_part_template
          5.1.19 Structured_printed_part_template_terminal
          5.1.20 Template_material_cross_section_boundary
          5.1.21 Usage_concept_usage_relationship
5.2 MIM EXPRESS short listing
5.2.1 MIM type definition
          5.2.1.1 pplt_groupable_item
5.2.2 MIM entity definitions
          5.2.2.1 basic_multi_stratum_printed_part_template
          5.2.2.2 multi_stratum_printed_part_template
          5.2.2.3 non_conductive_cross_section_template
          5.2.2.4 printed_connector_template
          5.2.2.5 printed_connector_template_terminal_relationship
          5.2.2.6 printed_part_cross_section_template
          5.2.2.7 printed_part_cross_section_template_terminal
          5.2.2.8 printed_part_template
          5.2.2.9 printed_part_template_connected_terminals_definition
          5.2.2.10 printed_part_template_material
          5.2.2.11 printed_part_template_material_link
          5.2.2.12 printed_part_template_terminal
          5.2.2.13 printed_part_template_terminal_connection_zone_category
          5.2.2.14 printed_tiebar_template
          5.2.2.15 single_stratum_printed_part_template
          5.2.2.16 structured_printed_part_template
          5.2.2.17 structured_printed_part_template_terminal
          5.2.2.18 template_material_cross_section_boundary
5.2.3 MIM subtype constraint definition
          5.2.3.1 pplt_part_template_definition_subtypes
Annex A MIM short names
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C ARM EXPRESS-G
Annex D MIM EXPRESS-G
Annex E Computer interpretable listings
Annex F Change history
F.1 General
F 2 Changes made in edition 2
F 2.1 Summary of changes
F 2.2 Changes made to the ARM
F 3 Changes made in edition 3
F 3.1 Summary of changes
F 3.2 Changes made to the ARM
F 4 Changes made in edition 4
F 4.1 Summary of changes
F 4.2 Changes made to the ARM
F 5 Changes made in edition 5
F 5.1 Summary of changes
F 5.2 Changes made to the ARM
F 5.3 Changes made to the mapping
F 5.4 Changes made to the MIM
F 6 Changes made in edition 6
F 6.1 Summary of changes
F 6.2 Changes made to the ARM
Bibliography
Index

Figures

Figure 1 — Single contact of a Printed_connector_template
Figure 2 — Printed connector component and associated terminals
Figure 3 — Printed_part_cross_section_template model structure
Figure 4 — Layered model representation
Figure 5 — Printed_part_template
Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 3
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 3
Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 3
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1

Tables

Table A.1 — MIM short names of entities
Table E.1 — ARM and MIM EXPRESS listings

Contents

Figures

Tables