Application module: Printed physical layout template ISO/TS 10303-1737:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
   4.5 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 3 ./armexpg3.htm ./armexpg3.htm ./armexpg3.htm ./armexpg2.htm ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../analytical_model/sys/4_info_reqs.htm#analytical_model_arm.analytical_model_application ../analytical_model/sys/4_info_reqs.htm#analytical_model_arm.analytical_model_application ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../analytical_model/sys/4_info_reqs.htm#analytical_model_arm.analytical_model_definition ../printed_physical_layout_template/sys/4_info_reqs.htm#printed_physical_layout_template_arm.printed_part_cross_section_template


Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 3


© ISO 2021 — All rights reserved