|
Application module:
Primitive solids |
ISO/TS 10303-1791:2019(E)
© ISO
|
Annex F
(informative)
Change history
This annex documents the history of technical modifications made to
ISO/TS 10303-1791.
The second
edition of this part of ISO 10303
incorporated
the modifications to the
first
edition listed below.
Minor editorial changes.
The third
edition of this part of ISO 10303
incorporated
the modifications to the
second
edition listed below.
The following changes have been made to the ARM to MIM mapping:
- Circular_cone mapping updated
- Circular_cylinder mapping updated
- Sphere mapping updated
- Torus mapping updated
This fourth
edition of this part of ISO 10303
incorporates
the modifications to the
third
edition listed below.
The following ARM EXPRESS declarations and interface specifications have been added:
- ENTITY boolean_result;
- ENTITY box_domain;
- ENTITY boxed_half_space;
- ENTITY convex_hexahedron;
- ENTITY csg_solid;
- ENTITY cyclide_segment_solid;
- ENTITY eccentric_cone;
- ENTITY ellipsoid;
- ENTITY extruded_face_solid;
- ENTITY faceted_primitive;
- ENTITY half_space_solid;
- ENTITY rectangular_pyramid;
- ENTITY revolved_face_solid;
- ENTITY right_angular_wedge;
- ENTITY solid_replica;
- ENTITY tetrahedron.
The following ARM EXPRESS declarations and interface specifications have been modified:
- ENTITY Circular_cone
- Remove Attribute 'axis_direction'
;
- Remove Attribute 'axis_point'
;
- Remove Attribute 'height'
;
- Remove Attribute 'radius'
;
- Remove Attribute 'semi_angle'
;
- Remove WHERE 'WR1';
- Remove WHERE 'WR2'.
- ENTITY Circular_cylinder
- Remove Attribute 'axis_direction'
;
- Remove Attribute 'axis_point'
;
- Remove Attribute 'height'
;
- Remove Attribute 'radius'
;
- Remove WHERE 'WR1';
- Remove WHERE 'WR2'.
- ENTITY Rectangular_block
- Remove Attribute 'corner_location'
;
- Remove Attribute 'height'
;
- Remove Attribute 'width'
;
- Remove Attribute 'xlength'
;
- Remove WHERE 'WR1';
- Remove WHERE 'WR2';
- Remove WHERE 'WR3'.
- ENTITY Sphere
- Remove Attribute 'centre'
;
- Remove Attribute 'radius'
;
- Remove WHERE 'WR1'.
- ENTITY Torus
- Remove Attribute 'axis_direction'
;
- Remove Attribute 'axis_point'
;
- Remove Attribute 'minor_radius'
;
- Remove Attribute 'radius'
;
- Remove WHERE 'WR1';
- Remove WHERE 'WR2'.
- SUBTYPE_CONSTRAINT ps_detailed_geometric_model_element_subtypes
SUBTYPE_CONSTRAINT ps_detailed_geometric_model_element_subtypes: Supertype expression
changed
.
In addition, modifications have been made to the mapping specification,
the MIM schema and the EXPRESS-G diagrams to reflect and be consistent
with the modifications of the ARM.
The following MIM EXPRESS declarations and interface specifications have been modified:
- USE_FROM geometric_model_schema.
© ISO 2019 — All rights reserved