Application module: Mechanical design features and requirements ISO/TS 10303-1846:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

(*
ISO/TC 184/SC 4/WG 12 N10176 - ISO/TS 10303-1846 Mechanical design features and requirements - EXPRESS MIM
Supersedes ISO/TC 184/SC 4/WG 12 N9659
*)



SCHEMA Mechanical_design_features_and_requirements_mim;

USE FROM Assembly_structure_mim;    -- ISO/TS 10303-1026

USE FROM Associative_draughting_elements_mim;    -- ISO/TS 10303-1311

USE FROM Characterizable_object_mim;    -- ISO/TS 10303-1765

USE FROM counterbore_countersink_schema;    -- ISO 10303-113

USE FROM Dimension_tolerance_mim;    -- ISO/TS 10303-1050

USE FROM Elemental_geometric_shape_mim;    -- ISO/TS 10303-1004

USE FROM Geometric_tolerance_mim;    -- ISO/TS 10303-1051

USE FROM Machining_features_mim;    -- ISO/TS 10303-1814

USE FROM mechanical_design_schema;    -- ISO 10303-113

USE FROM Part_view_definition_mim;    -- ISO/TS 10303-1023

USE FROM Requirement_assignment_mim;    -- ISO/TS 10303-1233

USE FROM Shape_property_assignment_mim;    -- ISO/TS 10303-1032

USE FROM Value_with_unit_extension_mim;    -- ISO/TS 10303-1753


TYPE md_requirement_assigned_item = SELECT BASED_ON requirement_assigned_item WITH
   (characterized_object,
    dimensional_size,
    dimensional_location,
    geometric_tolerance,
    product,
    product_definition_formation,
    product_definition,
    shape_aspect,
    product_definition_relationship);
END_TYPE;

TYPE md_requirement_source_item = SELECT BASED_ON requirement_source_item WITH
   (characterized_object,
    dimensional_size,
    dimensional_location,
    geometric_tolerance,
    product,
    product_definition_formation,
    product_definition,
    shape_aspect,
    product_definition_relationship);
END_TYPE;

ENTITY mechanical_design_requirement_item_association
  SUBTYPE OF (pmi_requirement_item_association);
  SELF\pmi_requirement_item_association.requirement : requirement_assignment;
END_ENTITY;

END_SCHEMA;  -- Mechanical_design_features_and_requirements_mim


© ISO 2021 — All rights reserved