Application module: Interconnect module with macros ISO/TS 10303-1687:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Interconnect_module_with_macros_mim;

USE FROM Layered_interconnect_module_design_mim;    --  ISO/TS 10303-1698
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Layered_interconnect_module_design_mim ISO/TS 10303-1698

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definitions

This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.

5.2.1.1 interconnect_module_macro_component   EXPRESS-G

An interconnect_module_macro_component is a type of physical_component that implements the ARM concept of Interconnect_module_macro_component.

EXPRESS specification:

*)
ENTITY interconnect_module_macro_component
  SUBTYPE OF (physical_component);
END_ENTITY;
(*

5.2.1.2 interconnect_module_macro_component_join_terminal   EXPRESS-G

An interconnect_module_macro_component_join_terminal is a type of physical_component_terminal that implements the ARM concept of Interconnect_module_macro_component_join_terminal.

EXPRESS specification:

*)
ENTITY interconnect_module_macro_component_join_terminal
  SUBTYPE OF (physical_component_terminal);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Interconnect_module_with_macros_mim
(*


© ISO 2018 — All rights reserved