Application module: Interconnect module connection routing ISO/TS 10303-1684:2010-03(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

EXPRESS specification:

*)
SCHEMA Interconnect_module_connection_routing_mim;

USE FROM Fabrication_joint_mim;    --  ISO/TS 10303-1668

USE FROM Interconnect_module_with_macros_mim;    --  ISO/TS 10303-1687
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Fabrication_joint_mim ISO/TS 10303-1668
Interconnect_module_with_macros_mim ISO/TS 10303-1687

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM type definition

This subclause specifies the MIM type for this application module. The MIM type and definition is specified below.

5.2.1.1 imcr_requirement_assigned_item   EXPRESS-G

The imcr_requirement_assigned_item type is an extension of the requirement_assigned_item type. It adds the data types dielectric_crossover_area and stratum_feature_conductive_join to the list of alternate data types.

NOTE  The list of entity data types may be extended in application modules that use the constructs of this module.

EXPRESS specification:

*)
TYPE imcr_requirement_assigned_item = EXTENSIBLE GENERIC_ENTITY SELECT BASED_ON requirement_assigned_item WITH
   (dielectric_crossover_area,
    stratum_feature_conductive_join);
END_TYPE;
(*

5.2.2 MIM entity definitions

This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.

5.2.2.1 dielectric_crossover_area   EXPRESS-G

A dielectric_crossover_area is a type of shape_aspect and of shape_aspect_relationship that implements the ARM concept of Dielectric_crossover_area.

EXPRESS specification:

*)
ENTITY dielectric_crossover_area
  SUBTYPE OF (shape_aspect, shape_aspect_relationship);
END_ENTITY;
(*

5.2.2.2 direct_stratum_component_join_implementation   EXPRESS-G

A direct_stratum_component_join_implementation is a type of shape_aspect_relationship that implements the ARM concept of Direct_stratum_component_join_implementation.

EXPRESS specification:

*)
ENTITY direct_stratum_component_join_implementation
  SUBTYPE OF (shape_aspect_relationship);
END_ENTITY;
(*

5.2.2.3 indirect_stratum_component_join_implementation   EXPRESS-G

An indirect_stratum_component_join_implementation is a type of plated_inter_stratum_feature that implements the ARM concept Indirect_stratum_component_join_implementation.

EXPRESS specification:

*)
ENTITY indirect_stratum_component_join_implementation
  SUBTYPE OF (plated_inter_stratum_feature);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Interconnect_module_connection_routing_mim
(*


© ISO 2009 — All rights reserved