Application module: Electrical network definition ISO/TS 10303-1665:2006(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM entity definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

EXPRESS specification:

*)
SCHEMA Electrical_network_definition_mim;

USE FROM Network_functional_design_view_mim;    --  ISO/TS 10303-1704
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Network_functional_design_view_mim ISO/TS 10303-1704

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definition

This subclause specifies the MIM entity for this module. The MIM entity and definition is specified below.

5.2.1.1 electrical_network   EXPRESS-G

An electrical_network is a type of functional_unit that implements the ARM concept of Electrical_network_definition.

EXPRESS specification:

*)
ENTITY electrical_network
  SUBTYPE OF (functional_unit);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Electrical_network_definition_mim
(*


© ISO 2006 — All rights reserved