Application module: Electrical network definition ISO/TS 10303-1665:2006(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM entity definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

4 Information requirements

This clause specifies the information requirements for the Electrical network definition application module. The information requirements are specified as the Application Reference Model (ARM) of this application module.

NOTE 1  A graphical representation of the information requirements is given in Annex C.

NOTE 2  The mapping specification is specified in 5.1. It shows how the information requirements are met by using common resources and constructs defined or imported in the MIM schema of this application module.

The following EXPRESS specification begins the Electrical_network_definition_arm schema and identifies the necessary external references.

EXPRESS specification:

*)
SCHEMA Electrical_network_definition_arm;
(*

4.1 Required AM ARM

The following EXPRESS interface statement specifies the elements imported from the ARM of another application module.

EXPRESS specification:

*)
USE FROM Network_functional_design_view_arm;    --  ISO/TS 10303-1704
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Network_functional_design_view_arm ISO/TS 10303-1704

NOTE 2   See Annex C, Figures C.1and C.2 for a graphical representation of this schema.

4.2 ARM entity definition

This subclause specifies the ARM entity for this module. The ARM entity is an atomic element that embodies a unique application concept and contains attributes specifying the data elements of the entity. The ARM entity and definition is specified below.

4.2.1 Electrical_network_definition   EXPRESS-GMapping table

An Electrical_network_definition is a type of Functional_unit_network_definition that identifes that the nodes in the network definition default to voltage as the nodal property. An approved electrical network shall be consistent with conservation laws (Kirchoff).

EXPRESS specification:

*)
ENTITY Electrical_network_definition
  SUBTYPE OF (Functional_unit_network_definition);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Electrical_network_definition_arm
(*


© ISO 2006 — All rights reserved