Application module: Draughting element specialisations ISO/TS 10303-1312:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Index

aic_draughting_elements
   MIM interface 5.2
chained_or_parallel
   ARM object definition 4.2.1
   ARM EXPRESS-G C.2
Datum_feature_callout
   ARM object definition 4.3.1
   ARM EXPRESS-G C.2
   mapping specification 5.1.1
Datum_target_callout
   ARM object definition 4.3.2
   ARM EXPRESS-G C.2
   mapping specification 5.1.2
Dimension
   ARM object definition 4.3.3
   ARM EXPRESS-G C.2
   mapping specification 5.1.3
Dimension_callout
   ARM object definition 4.3.4
   ARM EXPRESS-G C.2
   mapping specification 5.1.4
Dimension_callout_relationship
   ARM object definition 4.3.5
   ARM EXPRESS-G C.2
   mapping specification 5.1.5
dimension_callout_select
   ARM object definition 4.2.2
   ARM EXPRESS-G C.2
Dimension_prefix
   ARM object definition 4.3.6
   ARM EXPRESS-G C.2
   mapping specification 5.1.6
Dimension_sequence_pair
   ARM object definition 4.3.7
   ARM EXPRESS-G C.2
   mapping specification 5.1.7
Dimension_suffix
   ARM object definition 4.3.8
   ARM EXPRESS-G C.2
   mapping specification 5.1.8
dimension_type
   ARM object definition 4.2.3
   ARM EXPRESS-G C.2
Dimension_value
   ARM object definition 4.3.9
   ARM EXPRESS-G C.2
   mapping specification 5.1.9
Draughting_element
   ARM object definition 4.3.10
   ARM EXPRESS-G C.2
   mapping specification 5.1.10
Draughting_element_arm
   ARM interface 4.1
Draughting_element_mim
   MIM interface 5.2
Geometric_tolerance_callout
   ARM object definition 4.3.11
   ARM EXPRESS-G C.2
   mapping specification 5.1.11
presentation_definition_schema
   MIM interface 5.2
primary_or_secondary
   ARM object definition 4.2.4
   ARM EXPRESS-G C.2
Structured_dimension_callout
   ARM object definition 4.3.12
   ARM EXPRESS-G C.2
   mapping specification 5.1.12
Surface_condition_callout
   ARM object definition 4.3.13
   ARM EXPRESS-G C.2
   mapping specification 5.1.13
surface_condition_callout
   MIM object definition 5.2.1.1
   MIM EXPRESS-G D.2


© ISO 2018 — All rights reserved