ISO/TS 10303-1312:2018-11 Draughting element specialisations


Application module: Draughting element specialisations	ISO/TS 10303-1312:2018-11(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARM
4.2 ARM type definitions
4.3 ARM entity definitions
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Contents

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Information requirements
4.1 Required AM ARM
4.2 ARM type definitions
          4.2.1 chained_or_parallel
          4.2.2 dimension_callout_select
          4.2.3 dimension_type
          4.2.4 primary_or_secondary
4.3 ARM entity definitions
          4.3.1 Datum_feature_callout
          4.3.2 Datum_target_callout
          4.3.3 Dimension
          4.3.4 Dimension_callout
          4.3.5 Dimension_callout_relationship
          4.3.6 Dimension_prefix
          4.3.7 Dimension_sequence_pair
          4.3.8 Dimension_suffix
          4.3.9 Dimension_value
          4.3.10 Draughting_element
          4.3.11 Geometric_tolerance_callout
          4.3.12 Structured_dimension_callout
          4.3.13 Surface_condition_callout
5 Module interpreted model
5.1 Mapping specification
          5.1.1 Datum_feature_callout
          5.1.2 Datum_target_callout
          5.1.3 Dimension
          5.1.4 Dimension_callout
          5.1.5 Dimension_callout_relationship
          5.1.6 Dimension_prefix
          5.1.7 Dimension_sequence_pair
          5.1.8 Dimension_suffix
          5.1.9 Dimension_value
          5.1.10 Draughting_element
          5.1.11 Geometric_tolerance_callout
          5.1.12 Structured_dimension_callout
          5.1.13 Surface_condition_callout
5.2 MIM EXPRESS short listing
5.2.1 MIM entity definition
          5.2.1.1 surface_condition_callout
Annex A MIM short names
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C ARM EXPRESS-G
Annex D MIM EXPRESS-G
Annex E Computer interpretable listings
Annex F Change history
F.1 General
F 2 Changes made in edition 2
F 2.1 Summary of changes
F 2.2 Changes made to the ARM
F 3 Changes made in edition 3
F 3.1 Summary of changes
F 3.2 Changes made to the ARM
F 3.3 Changes made to the MIM
F 4 Changes made in edition 4
F 4.1 Summary of changes
F 4.2 Changes made to the ARM
Bibliography
Index

Figures

Figure 1 — Draughting callouts on a drawing
Figure 2 — Structured dimension callout
Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1

Tables

Table A.1 — MIM short names of entities
Table E.1 — ARM and MIM EXPRESS listings

© ISO 2018 — All rights reserved