ISO/TS 10303-1050:2019 Dimension tolerance


Application module: Dimension tolerance	ISO/TS 10303-1050:2019(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
4.3 ARM entity definitions
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM type definitions
5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
          4.2.1 adjoining_or_centred
          4.2.2 angle_relator
          4.2.3 diameter_qualifier_enumeration
          4.2.4 diameter_type
          4.2.5 dimension_target
          4.2.6 dimension_value_select
          4.2.7 dt_activity_item
          4.2.8 edge_of_undefined_shape_size_element
          4.2.9 geometric_dimension_modifier
          4.2.10 limitation_definition_select
          4.2.11 radial_type
          4.2.12 tolerance_principle_type
          4.2.13 undefined_edge_shape_enumeration_direction
4.3 ARM entity definitions
          4.3.1 Angle_plus_minus_bounds
          4.3.2 Angular_location
          4.3.3 Angular_size
          4.3.4 Curved_distance
          4.3.5 Curved_size
          4.3.6 Diameter_size
          4.3.7 Dimension_value_with_limitation
          4.3.8 Dimensional_location
          4.3.9 Dimensional_size
          4.3.10 Edge_of_undefined_shape_size
          4.3.11 Geometric_dimension
          4.3.12 Length_plus_minus_bounds
          4.3.13 Limits_and_fits
          4.3.14 Linear_distance
          4.3.15 Machining_feature_size
          4.3.16 Measurement_path
          4.3.17 Plus_minus_bounds
          4.3.18 Radial_size
          4.3.19 Thickness_size
          4.3.20 Tolerance_range
5 Module interpreted model
5.1 Mapping specification
          5.1.1 Applied_activity_assignment
          5.1.2 Angle_plus_minus_bounds
          5.1.3 Angular_location
          5.1.4 Angular_size
          5.1.5 Curved_distance
          5.1.6 Curved_size
          5.1.7 Diameter_size
          5.1.8 Dimension_value_with_limitation
          5.1.9 Dimensional_location
          5.1.10 Dimensional_size
          5.1.11 Edge_of_undefined_shape_size
          5.1.12 Geometric_dimension
          5.1.13 Length_plus_minus_bounds
          5.1.14 Limits_and_fits
          5.1.15 Linear_distance
          5.1.16 Machining_feature_size
          5.1.17 Measurement_path
          5.1.18 Plus_minus_bounds
          5.1.19 Radial_size
          5.1.20 Thickness_size
          5.1.21 Tolerance_range
5.2 MIM EXPRESS short listing
5.2.1 MIM type definitions
          5.2.1.1 dimension_identification_item
          5.2.1.2 dimension_tolerance_document_reference_item
          5.2.1.3 dt_action_items
5.2.2 MIM entity definition
          5.2.2.1 externally_defined_dimension_definition
Annex A MIM short names
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C ARM EXPRESS-G
Annex D MIM EXPRESS-G
Annex E Computer interpretable listings
Annex F Change history
F.1 General
F 2 Changes made in edition 2
F 2.1 Summary of changes
F 3 Changes made in edition 3
F 3.1 Summary of changes
F 4 Changes made in edition 4
F 4.1 Summary of changes
F 4.2 Changes made to the ARM
F 5 Changes made in edition 5
F 5.1 Summary of changes
F 5.2 Changes made to the ARM
F 5.3 Changes made to the MIM
F 6 Changes made in edition 6
F 6.1 Summary of changes
F 6.2 Changes made to the ARM
F 6.3 Changes made to the mapping
F 6.4 Changes made to the MIM
F 7 Changes made in edition 7
F 7.1 Summary of changes
F 7.2 Changes made to the ARM
F 7.3 Changes made to the mapping
F 7.4 Changes made to the MIM
Bibliography
Index

Figures

Figure 1 — Single angular shape element
Figure 2 — Angular_location
Figure 3 — Angular_size
Figure 4 — Dimensional location and dimensional size
Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 2
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 2
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1

Tables

Table E.1 — ARM and MIM EXPRESS listings

Contents

Figures

Tables