Application module: Conductivity material aspects ISO/TS 10303-1756:2010-07(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
   4.5 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

EXPRESS specification:

*)
SCHEMA Conductivity_material_aspects_mim;

USE FROM Classification_assignment_mim;    --  ISO/TS 10303-1114

USE FROM Generic_material_aspects_mim;    --  ISO/TS 10303-1681

USE FROM Part_view_definition_mim;    --  ISO/TS 10303-1023
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Classification_assignment_mim ISO/TS 10303-1114
Generic_material_aspects_mim ISO/TS 10303-1681
Part_view_definition_mim ISO/TS 10303-1023

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM type definition

This subclause specifies the MIM type for this application module. The MIM type and definition is specified below.

5.2.1.1 cma_classification_item   EXPRESS-G

The cma_classification_item type is an extension of the classification_item type. It adds the data type material_designation to the list of alternate data types.

NOTE  The list of entity data types may be extended in application modules that use the constructs of this module.

EXPRESS specification:

*)
TYPE cma_classification_item = EXTENSIBLE GENERIC_ENTITY SELECT BASED_ON classification_item WITH
   (material_designation);
END_TYPE;
(*

5.2.2 MIM entity definition

This subclause specifies the MIM entity for this module. The MIM entity and definition is specified below.

5.2.2.1 material_designation_with_conductivity_classification   EXPRESS-G

A material_designation_with_conductivity_classification is a type of material_designation.

EXPRESS specification:

*)
ENTITY material_designation_with_conductivity_classification
  SUBTYPE OF (material_designation);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Conductivity_material_aspects_mim
(*


© ISO 2010 — All rights reserved