Application module: Generic material aspects ISO/TS 10303-1681:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Generic_material_aspects_mim;

USE FROM Independent_property_representation_mim;    --  ISO/TS 10303-1038

USE FROM Product_view_definition_mim;    --  ISO/TS 10303-1019

USE FROM material_property_definition_schema    --  ISO 10303-45
  (material_designation,
   material_designation_characterization,
   material_property);

USE FROM material_property_representation_schema    --  ISO 10303-45
  (data_environment,
   material_property_representation);
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Independent_property_representation_mim ISO/TS 10303-1038
Product_view_definition_mim ISO/TS 10303-1019
material_property_definition_schema ISO 10303-45
material_property_representation_schema ISO 10303-45

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definition

This subclause specifies the MIM entity for this module. The MIM entity and definition is specified below.

5.2.1.1 general_material_property   EXPRESS-G

A general_material_property is a type of general_property that depends on material aspects.

EXPRESS specification:

*)
ENTITY general_material_property
  SUBTYPE OF (general_property);
WHERE
  WR1: SIZEOF( QUERY( gpa <* USEDIN(SELF,'PRODUCT_PROPERTY_DEFINITION_SCHEMA.GENERAL_PROPERTY_ASSOCIATION.BASE_DEFINITION') | NOT ('MATERIAL_PROPERTY_DEFINITION_SCHEMA.MATERIAL_PROPERTY' IN TYPEOF(gpa\general_property_association.derived_definition)) )) = 0;
END_ENTITY;
(*

Formal propositions:

WR1: A general_material_property may only be referenced as the base_definition by general_property_association instances which reference as derived_definition a property_definition of type material_property.



*)
END_SCHEMA;  -- Generic_material_aspects_mim
(*


© ISO 2018 — All rights reserved