Application module: Cable | ISO/TS 10303-1653:2018-11(E) © ISO |
This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the application module.
This clause also specifies the modifications that apply to the constructs imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.
EXPRESS specification:
*)
SCHEMA Cable_mim;
USE FROM
Assembly_module_with_packaged_connector_component_mim;
--
ISO/TS 10303-1645
(*
NOTE 1 The schemas referenced above are specified in the following part of ISO 10303:
Assembly_module_with_packaged_connector_component_mim ISO/TS 10303-1645
NOTE 2 See Annex D, Figures D.1and D.2 for a graphical representation of this schema.
This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.
EXPRESS specification:
*)
ENTITY cable_terminal
SUBTYPE OF (shape_aspect);
SELF\shape_aspect.of_shape : cable_usage_view;
END_ENTITY;
(*
Attribute definitions:
of_shape: an attribute inherited from the shape_aspect shall be redeclared as the cable_usage_view for the cable_terminal.
EXPRESS specification:
*)
ENTITY cable_usage_view
SUBTYPE OF (physical_unit);
END_ENTITY;
(*
*)
END_SCHEMA; -- Cable_mim
(*
© ISO 2018 — All rights reserved