Application module: Assembly module with packaged connector component | ISO/TS 10303-1645:2018-11(E) © ISO |
This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the application module.
This clause also specifies the modifications that apply to the constructs imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.
EXPRESS specification:
*)
SCHEMA Assembly_module_with_packaged_connector_component_mim;
USE FROM
Altered_package_mim;
--
ISO/TS 10303-1601
USE FROM
Assembly_module_with_packaged_component_mim;
--
ISO/TS 10303-1829
USE FROM
Interface_component_mim;
--
ISO/TS 10303-1691
USE FROM
Packaged_connector_model_mim;
--
ISO/TS 10303-1708
(*
NOTE 1 The schemas referenced above are specified in the following part of ISO 10303:
Altered_package_mim ISO/TS 10303-1601 Assembly_module_with_packaged_component_mim ISO/TS 10303-1829 Interface_component_mim ISO/TS 10303-1691 Packaged_connector_model_mim ISO/TS 10303-1708
NOTE 2 See Annex D, Figures D.1and D.2 for a graphical representation of this schema.
This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.
An interface_mounted_join is a type of shape_aspect and a type of shape_aspect_relationship that implements the ARM concept of Interface_mounted_join. An interface_mounted_join relates a component_terminal to a physical_component_interface_terminal.
EXPRESS specification:
*)
ENTITY interface_mounted_join
SUBTYPE OF (shape_aspect_relationship, shape_aspect);
END_ENTITY;
(*
EXPRESS specification:
*)
ENTITY packaged_connector_component
SUBTYPE OF (interface_component, packaged_component);
END_ENTITY;
(*
*)
END_SCHEMA; -- Assembly_module_with_packaged_connector_component_mim
(*
© ISO 2018 — All rights reserved