Application module: Packaged connector model ISO/TS 10303-1708:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM entity definitions
   4.3 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Packaged_connector_model_mim;

USE FROM Packaged_part_black_box_model_mim;    --  ISO/TS 10303-1710
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Packaged_part_black_box_model_mim ISO/TS 10303-1710

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definitions

This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.

5.2.1.1 packaged_connector   EXPRESS-G

A packaged_connector is a type of packaged_part that implements the ARM concept of Packaged_connector.

EXPRESS specification:

*)
ENTITY packaged_connector
  SUBTYPE OF (packaged_part);
END_ENTITY;
(*

5.2.1.2 packaged_connector_terminal_relationship   EXPRESS-G

A packaged_connector_terminal_relationship is a type of shape_aspect and of shape_aspect_relationship that implements the ARM concept of Packaged_connector_terminal_relationship.

EXPRESS specification:

*)
ENTITY packaged_connector_terminal_relationship
  SUBTYPE OF (shape_aspect, shape_aspect_relationship);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Packaged_connector_model_mim
(*


© ISO 2018 — All rights reserved