Application module: Assembly physical requirement allocation | ISO/TS 10303-1648:2018-11(E) © ISO |
This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the application module.
This clause also specifies the modifications that apply to the constructs imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.
EXPRESS specification:
*)
SCHEMA Assembly_physical_requirement_allocation_mim;
USE FROM
Assembly_physical_interface_requirement_mim;
--
ISO/TS 10303-1647
USE FROM
Assembly_technology_mim;
--
ISO/TS 10303-1649
USE FROM
Discrete_shield_mim;
--
ISO/TS 10303-1744
(*
NOTE 1 The schemas referenced above are specified in the following part of ISO 10303:
Assembly_physical_interface_requirement_mim ISO/TS 10303-1647 Assembly_technology_mim ISO/TS 10303-1649 Discrete_shield_mim ISO/TS 10303-1744
NOTE 2 See Annex D, Figures D.1and D.2 for a graphical representation of this schema.
This subclause specifies the MIM types for this application module. The MIM types and definitions are specified below.
The apra_groupable_item type is an extension of the groupable_item type. It adds the data types shape_aspect, and product_definition to the list of alternate data types.
EXPRESS specification:
*)
TYPE
apra_groupable_item =
SELECT
BASED_ON
groupable_item
WITH
(shape_aspect,
product_definition);
END_TYPE;
(*
The apra_requirement_assigned_item type is an extension of the requirement_assigned_item type. It adds the data types product_definition, and shape_aspect to the list of alternate data types.
EXPRESS specification:
*)
TYPE
apra_requirement_assigned_item =
SELECT
BASED_ON
requirement_assigned_item
WITH
(product_definition,
shape_aspect);
END_TYPE;
(*
This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.
EXPRESS specification:
*)
ENTITY assembly_shield_allocation
SUBTYPE OF (electromagnetic_compatibility_requirement_allocation);
END_ENTITY;
(*
EXPRESS specification:
*)
ENTITY electromagnetic_compatibility_requirement_allocation
SUPERTYPE OF (assembly_shield_allocation)
SUBTYPE OF (requirement_assignment);
END_ENTITY;
(*
EXPRESS specification:
*)
ENTITY thermal_requirement_allocation
SUBTYPE OF (requirement_assignment);
END_ENTITY;
(*
*)
END_SCHEMA; -- Assembly_physical_requirement_allocation_mim
(*
© ISO 2018 — All rights reserved