Application module: Discrete shield | ISO/TS 10303-1744:2018-11(E) © ISO |
This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the application module.
This clause also specifies the modifications that apply to the constructs imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.
EXPRESS specification:
*)
SCHEMA Discrete_shield_mim;
USE FROM
Assembly_component_placement_requirements_mim;
--
ISO/TS 10303-1634
USE FROM
Physical_connectivity_definition_mim;
--
ISO/TS 10303-1755
(*
NOTE 1 The schemas referenced above are specified in the following part of ISO 10303:
Assembly_component_placement_requirements_mim ISO/TS 10303-1634 Physical_connectivity_definition_mim ISO/TS 10303-1755
NOTE 2 See Annex D, Figures D.1and D.2 for a graphical representation of this schema.
This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.
A physical_shield is a type of physical_component that implements the ARM concept of Physical_shield, when the shield is comprised of a component or components that are manufactured separately from the interconnect component.
EXPRESS specification:
*)
ENTITY physical_shield
SUBTYPE OF (physical_component);
END_ENTITY;
(*
EXPRESS specification:
*)
ENTITY routed_physical_shield
SUBTYPE OF (physical_shield, routed_physical_component);
END_ENTITY;
(*
*)
END_SCHEMA; -- Discrete_shield_mim
(*
© ISO 2018 — All rights reserved