Application module: Assembly module macro definition ISO/TS 10303-1637:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM entity definitions
   4.3 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition
     5.2.2 MIM subtype constraint definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Annex A
(normative)

MIM short names

Table A.1 provides the short names for entities defined in the MIM of this part of ISO 10303.

Entity names in this part of ISO 10303 have been defined in Clause 5.2 and in other ISO standards identified in Clause 2.

Requirements on the use of the short names are found in the implementation methods included in ISO 10303.

NOTE  The EXPRESS entity names are available from the following URL:

http://standards.iso.org/iso/10303/tech/short_names/short_names.txt

Table A.1— MIM short names of entities

Entity data types names Short names
assembly_module_macro_terminal AMMT


© ISO 2014 — All rights reserved