Application module: Assembly module macro definition ISO/TS 10303-1637:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM entity definitions
   4.3 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition
     5.2.2 MIM subtype constraint definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../physical_unit_design_view/sys/4_info_reqs.htm#physical_unit_design_view_arm.component_feature_to_physical_usage_view_assignment ../interconnect_module_with_macros/sys/4_info_reqs.htm#interconnect_module_with_macros_arm.interconnect_module_macro_component_join_terminal ../physical_unit_design_view/sys/4_info_reqs.htm#physical_unit_design_view_arm.component_feature_to_physical_usage_view_assignment ../assembly_module_usage_view/sys/4_info_reqs.htm#assembly_module_usage_view_arm.assembly_module_terminal ../assembly_module_macro_definition/sys/4_info_reqs.htm#assembly_module_macro_definition_arm.assembly_module_macro_terminal ../assembly_module_macro_definition/sys/4_info_reqs.htm#assembly_module_macro_definition_arm.component_terminal_to_assembly_module_macro_terminal_assignment ../assembly_module_macro_definition/sys/4_info_reqs.htm#assembly_module_macro_definition_arm.assembly_module_terminal_subtypes


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2014 — All rights reserved