ISO/TS 10303-1835:2019 Additive manufacturing part and build information


Application module: Additive manufacturing part and build information	ISO/TS 10303-1835:2019(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definition
4.3 ARM entity definitions
4.4 ARM subtype constraint definition
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM entity definitions
5.2.2 MIM rule definition

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Application module implementation and usage guide
G Change history
Bibliography
Index

Annex G
(informative)

Change history

G.1 General

This annex documents the history of technical modifications made to ISO/TS 10303-1835.

G.2 Changes made in edition 2

G.2.1 Summary of changes

This second edition of this part of ISO 10303 incorporates the modifications to the first edition listed below.

G.2.2 Changes made to the ARM

The following ARM EXPRESS declarations and interface specifications have been modified:

ENTITY Additive_manufacturing_build_direction_element
- Remove Attribute 'identified_item' ;
- Remove DERIVE 'element_name';
- Add WHERE 'WR1' ;
- Figure updated .
ENTITY Additive_manufacturing_orientation_element
- Add Attribute 'identified_item';
- Add DERIVE 'element_name'.
ENTITY Additive_manufacturing_x_direction_element
- Remove Attribute 'identified_item' ;
- Remove DERIVE 'element_name';
- Add WHERE 'WR1' .

The following ARM EXPRESS declarations and interface specifications have been removed:

TYPE ampubi_constructive_element_select.

In addition, modifications have been made to the mapping specification, the MIM schema and the EXPRESS-G diagrams to reflect and be consistent with the modifications of the ARM.

G.2.3 Changes made to the mapping

The following changes have been made to the ARM to MIM mapping:

Additive_manufacturing_build_direction_element mapping updated;
Additive_manufacturing_orientation_element mapping updated;
Additive_manufacturing_part_definition mapping updated;
Additive_manufacturing_setup mapping updated;
Additive_manufacturing_setup_build_plate mapping updated;
Additive_manufacturing_support_structure_setup mapping updated;
Additive_manufacturing_workpiece_setup mapping updated;
Additive_manufacturing_x_direction_element mapping updated;
Build_platform_definition mapping updated;
Circular_build_volume mapping updated;
Rectangular_build_volume mapping updated;
Additive_manufacturing_part_view_subtypes mapping added.

G.2.4 Changes made to the MIM

The following MIM EXPRESS declarations and interface specifications have been added:

RULE restrict_support_structure_category.

Annex G (informative)Change history