|
|
Application module:
Additive manufacturing part and build information |
ISO/TS 10303-1835:2019(E)
© ISO
|
This clause specifies the EXPRESS schema derived from the mapping
table.
It uses elements from the common resources or from other application
modules and defines the EXPRESS constructs that are specific to this
part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the
application module.
This clause also
specifies the modifications that apply to the constructs
imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application
modules:
-
use of a supertype entity does not make applicable any of its
specializations, unless the specialization is also imported in the
MIM schema;
-
use of a SELECT type does not make applicable any of its listed types
unless the listed type is also imported in the MIM schema.
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined
in Annex B.
EXPRESS specification:
*)
SCHEMA Additive_manufacturing_part_and_build_information_mim;
USE FROM
Assembly_structure_mim;
--
ISO/TS 10303-1026
USE FROM
Construction_geometry_mim;
--
ISO/TS 10303-1131
USE FROM
Elemental_geometric_shape_mim;
--
ISO/TS 10303-1004
USE FROM
Foundation_representation_mim;
--
ISO/TS 10303-1006
USE FROM
Item_definition_structure_mim;
--
ISO/TS 10303-1345
USE FROM
Part_shape_mim;
--
ISO/TS 10303-1807
USE FROM
Part_view_definition_mim;
--
ISO/TS 10303-1023
USE FROM
Process_plan_mim;
--
ISO/TS 10303-1803
USE FROM
product_structure_schema
--
ISO 10303-44
(next_assembly_usage_occurrence);
USE FROM
shape_aspect_definition_schema
--
ISO 10303-47
(shape_representation_with_parameters);
USE FROM
Value_with_unit_extension_mim;
--
ISO/TS 10303-1753
(*
NOTE 1
The schemas referenced above are specified in the following
part of ISO 10303:
| Assembly_structure_mim |
ISO/TS 10303-1026 |
| Construction_geometry_mim |
ISO/TS 10303-1131 |
| Elemental_geometric_shape_mim |
ISO/TS 10303-1004 |
| Foundation_representation_mim |
ISO/TS 10303-1006 |
| Item_definition_structure_mim |
ISO/TS 10303-1345 |
| Part_shape_mim |
ISO/TS 10303-1807 |
| Part_view_definition_mim |
ISO/TS 10303-1023 |
| Process_plan_mim |
ISO/TS 10303-1803 |
| product_structure_schema |
ISO 10303-44 |
| shape_aspect_definition_schema |
ISO 10303-47 |
| Value_with_unit_extension_mim |
ISO/TS 10303-1753 |
NOTE 2
See Annex D,
Figures
D.1and D.2
for a graphical representation of this schema.
This subclause specifies the MIM entities for this
module. The MIM entities and definitions are specified below.
An additive_manufacturing_build_plate_relationship is a type of
additive_manufacturing_setup_relationship that specifies the usage of a build plate in the setup.
EXPRESS specification:
*)
ENTITY additive_manufacturing_build_plate_relationship
SUBTYPE OF (additive_manufacturing_setup_relationship);
END_ENTITY;
(*
An additive_manufacturing_setup is a type of
product that specifies the setup for one or more workpieces.
EXPRESS specification:
*)
ENTITY additive_manufacturing_setup
SUBTYPE OF (product);
END_ENTITY;
(*
An additive_manufacturing_setup_relationship is a type of
next_assembly_usage_occurrence that specifies the usage of a workpiece, or a support, or a build plate in the setup.
EXPRESS specification:
*)
ENTITY additive_manufacturing_setup_relationship
ABSTRACT SUPERTYPE
OF (ONEOF (additive_manufacturing_build_plate_relationship,
additive_manufacturing_support_structure_geometry_relationship,
additive_manufacturing_setup_workpiece_relationship))
SUBTYPE OF (next_assembly_usage_occurrence);
END_ENTITY;
(*
An additive_manufacturing_setup_workpiece_relationship is a type of
additive_manufacturing_setup_relationship that specifies the usage of a workpiece in the setup.
EXPRESS specification:
*)
ENTITY additive_manufacturing_setup_workpiece_relationship
SUBTYPE OF (additive_manufacturing_setup_relationship);
END_ENTITY;
(*
An additive_manufacturing_support_structure_geometry_relationship is a type of
additive_manufacturing_setup_relationship that specifies the usage of a support structure in the setup.
EXPRESS specification:
*)
ENTITY additive_manufacturing_support_structure_geometry_relationship
SUBTYPE OF (additive_manufacturing_setup_relationship);
END_ENTITY;
(*
A machining_process_executable is a type of
process_operation that represents an executable step in a process.
NOTE
The entity machining_process_executable is defined by ISO 10303-238 and is reused here for reasons of interoperability
EXPRESS specification:
*)
ENTITY machining_process_executable
SUBTYPE OF (process_operation);
END_ENTITY;
(*
This subclause specifies the MIM rule for
this module. The MIM rule and definition is
specified below.
The restrict_support_structure_category rule states that an additive manufacturing support structure shall not have a product_related_product_category.name of "part".
EXPRESS specification:
*)
RULE restrict_support_structure_category FOR
(product_definition);
LOCAL
support_structures: SET OF product_definition := [];
END_LOCAL;
support_structures := QUERY ( pd <* product_definition |
( SIZEOF ( QUERY ( prpc <* USEDIN ( pd.formation.of_product ,
'PRODUCT_DEFINITION_SCHEMA.PRODUCT_RELATED_PRODUCT_CATEGORY.PRODUCTS' ) |
prpc. name ='additive manufacturing support structure' ) ) <> 0 ) );WHERE
WR1: SIZEOF ( QUERY ( pd <* support_structures |
( SIZEOF ( QUERY ( prpc <* USEDIN ( pd.formation.of_product ,
'PRODUCT_DEFINITION_SCHEMA.PRODUCT_RELATED_PRODUCT_CATEGORY.PRODUCTS' ) |
prpc. name ='part' ) ) <> 0 ) ) ) =0;
END_RULE;
(*
Argument definitions:
product_definition :
the set of all instances of
product_definition.
Formal propositions:
WR1:
a product_definition associated with a product_related_product_category.name of "additive manufacturing support structure" shall not have a product_related_product_category.name of "part".
*)
END_SCHEMA; -- Additive_manufacturing_part_and_build_information_mim
(*
© ISO 2019 — All rights reserved
