Application module: Additive manufacturing part and build information ISO/TS 10303-1835:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions
     5.2.2 MIM rule definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Application module implementation and usage guide
G Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 3 ./armexpg4.htm ./armexpg2.htm ./armexpg2.htm ../assembly_structure/sys/4_info_reqs.htm#assembly_structure_arm.next_assembly_usage ../process_plan/sys/4_info_reqs.htm#process_plan_arm.process_operation_definition ../contextual_shape_positioning/sys/4_info_reqs.htm#contextual_shape_positioning_arm.contextual_shape_representation ../contextual_shape_positioning/sys/4_info_reqs.htm#contextual_shape_positioning_arm.contextual_shape_representation ../assembly_structure/sys/4_info_reqs.htm#assembly_structure_arm.next_assembly_usage ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement_3d ../assembly_structure/sys/4_info_reqs.htm#assembly_structure_arm.next_assembly_usage ../contextual_shape_positioning/sys/4_info_reqs.htm#contextual_shape_positioning_arm.contextual_shape_representation ../item_definition_structure/sys/4_info_reqs.htm#item_definition_structure_arm.assembly_definition ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_workplan ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.executable ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_support_structure_setup ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_setup_build_plate ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_workpiece_setup ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_setup


Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 3


© ISO 2019 — All rights reserved