ENTITY machining_tool_dimension_representation

(* SCHEMA step_merged_ap_schema; *)

-- IN AP238 DIS
ENTITY machining_tool_dimension_representation
  SUBTYPE OF (representation);
  WHERE
  WR1:  NOT (SELF.name = 'milling') OR
        ((verify_required_rep_item       (SELF, 'diameter')) AND
         (verify_length_measure_rep_item (SELF, 'diameter')) AND

         (verify_optional_rep_item       (SELF, 'tool tip half angle')) AND
         (verify_angle_measure_rep_item  (SELF, 'tool tip half angle')) AND

         (verify_optional_rep_item       (SELF, 'tool circumference angle')) AND
         (verify_angle_measure_rep_item  (SELF, 'tool circumference angle')) AND

         (verify_optional_rep_item       (SELF, 'cutting edge length')) AND
         (verify_length_measure_rep_item (SELF, 'cutting edge length')) AND

         (verify_optional_rep_item       (SELF, 'edge radius')) AND
         (verify_length_measure_rep_item (SELF, 'edge radius')) AND

         (verify_optional_rep_item       (SELF, 'edge center vertical')) AND
         (verify_length_measure_rep_item (SELF, 'edge center vertical')) AND

         (verify_optional_rep_item       (SELF, 'edge center horizontal')) AND
         (verify_length_measure_rep_item (SELF, 'edge center horizontal'))
        );

  WR2:  NOT (SELF.name = 'turning') OR
        ((verify_optional_rep_item       (SELF, 'cutting edge length')) AND
         (verify_length_measure_rep_item (SELF, 'cutting edge length')) AND

         (verify_optional_rep_item       (SELF, 'side cutting edge angle')) AND
         (verify_angle_measure_rep_item  (SELF, 'side cutting edge angle')) AND

         (verify_optional_rep_item       (SELF, 'end cutting edge angle')) AND
         (verify_angle_measure_rep_item  (SELF, 'end cutting edge angle')) AND

         (verify_optional_rep_item       (SELF, 'side rake angle')) AND
         (verify_angle_measure_rep_item  (SELF, 'side rake angle')) AND

         (verify_optional_rep_item       (SELF, 'back rake angle')) AND
         (verify_angle_measure_rep_item  (SELF, 'back rake angle')) AND

         (verify_optional_rep_item       (SELF, 'side clearance angle')) AND
         (verify_angle_measure_rep_item  (SELF, 'side clearance angle')) AND

         (verify_optional_rep_item       (SELF, 'back clearance angle')) AND
         (verify_angle_measure_rep_item  (SELF, 'back clearance angle')) AND

         (verify_optional_rep_item       (SELF, 'nose radius')) AND
         (verify_length_measure_rep_item (SELF, 'nose radius')) AND

         (verify_optional_rep_item       (SELF, 'circle diameter')) AND
         (verify_length_measure_rep_item (SELF, 'circle diameter'))
        );

--  WR3:  (0 = SIZEOF (QUERY (rr <* USEDIN (SELF,
--          'STEP_MANUFACTURING_SCHEMA.REPRESENTATION_RELATIONSHIP.REP_2') |
--         ('STEP_MANUFACTURING_SCHEMA.MACHINING_TOOL_BODY_REPRESENTATION'
--          IN TYPEOF(rr.rep_1)) AND (rr.rep_1.name = 'ball endmill')))
--        ) OR (verify_ball_endmill_edge_dimensions (SELF));


  WR4:  (0 = SIZEOF (QUERY (rr <* USEDIN (SELF,
          'STEP_MANUFACTURING_SCHEMA.REPRESENTATION_RELATIONSHIP.REP_2') |
         ('STEP_MANUFACTURING_SCHEMA.MACHINING_TOOL_BODY_REPRESENTATION'
          IN TYPEOF(rr.rep_1)) AND
         (rr.rep_1.name IN ['bullnose endmill', 'ball endmill'])))
        ) OR (
         (0 = SIZEOF (QUERY ( it <* SELF.items |
          (it.name = 'tool tip half angle') AND NOT
          (it.value_component = 0)))
         ) AND
         (0 = SIZEOF (QUERY ( it <* SELF.items |
          (it.name = 'tool circumference angle') AND NOT
          (it.value_component = 0)))
         )
        );
END_ENTITY;

Explicit Attributes

Derived Attributes

Inverse Attributes

Supertypes

Subtypes

Referenced By

Generated by STEP Tools® EXPRESS to HTML Converter
2024-09-06T14:00:32-04:00