Integrated generic resource: Material and other engineering properties ISO 10303-45:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Material property definition
   4.1 General
   4.2 Fundamental concepts and assumptions
   4.3 Material property definition type definitions
   4.4 Material property definition entity definitions
   4.5 Material property definition function definitions
5 Material property representation
   5.1 General
   5.2 Fundamental concepts and assumptions
   5.3 Material property representation type definition
   5.4 Material property representation entity definitions
6 Qualified measure
   6.1 General
   6.2 Fundamental concepts and assumptions
   6.3 Qualified measure type definitions
   6.4 Qualified measure entity definitions

A Short names of entities
B Information object registration
C Computer interpretable listings
D EXPRESS-G diagrams
E Technical discussion
F Change history
Bibliography
Index

Annex B
(normative)

Information object registration

B.1 Document Identification

To provide for unambiguous identification of an information object in an open system, the object identifier

{ iso standard 10303 part(45) version(5) }

is assigned to this part of ISO 10303. The meaning of this value is defined in ISO/IEC 8824-1, and is described in ISO 10303-1.

B.2 Schema identification

B.2.1 material-property-definition-schema schema identification

To provide for unambiguous identification of the schema specifications given in this integrated resource in an open information system, the object identifiers are assigned as follows:

{ iso standard 10303 part(45) version(4) object(1) material-property-definition-schema(1) }

is assigned to the material-property-definition-schema schema. The meaning of this value is defined in ISO/IEC 8824-1, and is described in ISO 10303-1.

B.2.2 material-property-representation-schema schema identification

To provide for unambiguous identification of the schema specifications given in this integrated resource in an open information system, the object identifiers are assigned as follows:

{ iso standard 10303 part(45) version(2) object(1) material-property-representation-schema(2) }

is assigned to the material-property-representation-schema schema. The meaning of this value is defined in ISO/IEC 8824-1, and is described in ISO 10303-1.

B.2.3 qualified-measure-schema schema identification

To provide for unambiguous identification of the schema specifications given in this integrated resource in an open information system, the object identifiers are assigned as follows:

{ iso standard 10303 part(45) version(4) object(1) qualified-measure-schema(3) }

is assigned to the qualified-measure-schema schema. The meaning of this value is defined in ISO/IEC 8824-1, and is described in ISO 10303-1.



© ISO 2019 — All rights reserved