Application module: Topologically bounded surface ISO/TS 10303-1511:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Annex F
(informative)

Change history

F.1 General

This annex documents the history of technical modifications made to ISO/TS 10303-1511.

F.2 Changes made in edition 2

F.2.1 Summary of changes

This second edition of this part of ISO 10303 incorporates the modifications to the first edition listed below.

The inter-schema references in the ARM and the MIM have been changed in this module in order to import appropriate geometric and topological constructs.

This module now references the B_spline_geometry module and the Basic_geometric_topology module; these references replace ARM abd MIM references to the Elemental_geometric_shape module.

Corresponding changes have been made to the EXPRESS-G diagrams.

F.2.2 Changes made to the ARM

The following ARM EXPRESS declarations and interface specifications have been modified:

In addition, modifications have been made to the mapping specification, the MIM schema and the EXPRESS-G diagrams to reflect and be consistent with the modifications of the ARM.



© ISO 2014 — All rights reserved